PDF24 Creator Changelog

Version 8.1.0
Version 8.0.4
Version 8.0.3
Version 8.0.2
Version 8.0.1
Version 8.0.0
Version 7.9.0
Version 7.8.1
Version 7.8.0
Version 7.7.0
Version 7.6.4
Version 7.6.3
Version 7.6.2
Version 7.6.1
Version 7.6.0
Version 7.5.0
Version 7.4.1
Version 7.4.0
Version 7.3.1
Version 7.3.0
Version 7.2.0
Version 7.1.0
Version 7.0.7
Version 7.0.6
Version 7.0.5
Version 7.0.4
Version 7.0.3
Version 7.0.2
Version 7.0.1
Version 7.0.0
Version 6.9.2
Version 6.9.1
Version 6.9.0
Version 6.8.0
Version 6.7.0
Version 6.6.0
Version 6.5.0
Version 6.4.1
Version 6.4.0
Version 6.3.2
Version 6.3.1
Version 6.3.0
Version 6.2.0
Version 6.1.0
Version 6.0.1
Version 6.0.0
Version 5.7.0
Version 5.6.0
Version 5.5.1
Version 5.5.0
Version 5.4.0
Version 5.3.0
Version 5.2.0
Version 5.1.0
Version 5.0.0
Version 4.9.0
Version 4.8.0
Version 4.7.0
Version 4.6.0
Version 4.5.0
Version 4.4.3
Version 4.4.2
Version 4.4.1
Version 4.4.0
Version 4.3.0
Version 4.2.0
Version 4.1.2
Version 4.1.1
Version 4.1.0
Version 4.0.0
Version 3.9.0
Version 3.8.0
Version 3.7.0
Version 3.6.0
Version 3.5.3
Version 3.5.2
Version 3.5.1
Version 3.5.0
Version 3.4.0
Version 3.3.0
Version 3.2.0
Version 3.1.0
Version 3.0.0
Version 2.9.9
Version 2.9.8
Version 2.9.7
Version 2.9.6
Version 2.9.5
Version 2.9.4
Version 2.9.3
Version 2.9.2
Versão 2.9.1
Versão 2.9.0
Versão 2.8.8
Versão 2.8.7
Versão 2.8.6
Versão 2.8.5
Versão 2.8.4
Versão 2.8.3
Versão 2.8.2
Versão 2.8.1
Versão 2.8.0
Versão 2.7.0
Versão 2.6.3
Versão 2.6.2
Versão 2.6.1
Version 2.6.0
Versão 2.5.1
Version 2.5.0
Versão 2.0.1
Version 2.0.0

Version 8.1.0

(23.02.2017)

Feature: Page numbering feature added

Page numbers can now be added to PDF files automatically. We have continuously developed this feature in the past and now it is ready for use. The Save-As dialog contains a new sections where you can configure the page numbering options. These settings can also be stored into an output filter profile. The page numbering feature is extremely helpful, when you merge or join multiple files and if the final file shall have page numbers.

Feature: Watermark/Stamp texts with placeholders

Watermark and stamp texts can now have some placeholder. The PDF24 Creator replaces these placeholders before the file gets saved. Currently, placeholders for time and date are available. You can use this new feature to realize e.g. a date or receipt stamp.

We have also improved the watermark function to the effect, that it can also be used together with the new page numbering feature of this version.

Improvement: Language files and core functions

Under the hood, we have optimized and improved some core parts to make them better and more secure. We have also updated the language files and we have done some foundation works for future versions.

Version 8.0.4

(20.12.2016)

BugFix: PDF printer was not always usable under Windows XP

The PDF printer was not always usable under Windows XP. Some users have reported problems with Windows XP. We did not notice this kind of problem at first. We have used a fresh system to analyze this issue. The bug is now fixed and the PDF printer from version 8.0.4 can now be used under Windows XP again.

Improvement: Info text "Not started as Admin" on the PDF printer settings page

In the PDF printer settings section, it is relevant whether or not the settings have been started as a user with extended admin rights. If you start the settings without admin rights and if you change the settings on the PDF printer page, then the changes apply only to the current user. If, on the other hand, the settings are started as admin, the changes in this area apply to all users. This distinction must be taken into account when configuring a PDF printer.

Some users have reported that auto save mode did not work with shared PDF printers. Since version 8, a Windows service is used for the PDF printer handler. This service usually runs under the special user LocalSystem. If a print job arrives via a shared PDF printer, then there is no user context in this case. If the PDF printer is configured for a specific user only, then these settings can not be used because the reference to this user is not available. The PDF24 Windows Service can therefore only use the settings created for all users.

It is strictly necessary to configure a PDF printer as admin if you share that printer. In the settings area, there is now an information text, so that this distinction is pointed out. You can also directly start the settings as admin via a link in the information text.

Version 8.0.3

(15.12.2016)

BugFix: Loading of PDF files with small errors

The loading of PDF files with small errors was broken in version 8.x. We have investigated this issue and we have found the bug. This version fixes this, so that version 8.0.3 can load PDF files with small recoverable errors again.

Improvement: A lot of language files updated

About half of the over 30 language files are now up to date and all texts of these files are translated. The other half contains some untranslated texts. If the application finds an untranslated text, then the corresponding English text will be used instead. We update language files on a rolling basis and we bring new language files with new versions.

Improvement: Issue with file extensions fixed

We have overworked some code parts where it comes to replacing file name extensions. The problem is to find out whether the file name has an extension or not. This version looks for registered extensions in the system and if an extension is registered then the application replaces the old extension with the new one. If the extension is not registred, then the new extension is simply appended.

BugFix: File Explorer Drag & Drop Bug of folders fixed

If you wanted to move a folder by dragging and dropping them to the new place, then it could happen that the application moved the wrong folder, the folder below or above, depending on the move direction and where the name was clicked. We have fixed this bug.

Version 8.0.2

(15.11.2016)

Improvement: Optimizes terminal server features

The PDF24 Creator 8.0.2 mainly optimizes features, which are relevant for the usage on terminal servers and multi-user environments. The optimizations also fixes some potential bugs in these features.

Version 8.0.1

(08.11.2016)

BugFix: PDF printer could not be used with Word

The PDF printer could not be used together with Word, but with other software. The PDF printer was available in the list and could be selected, but after selection, the list view was curiously empty. I think other Microsoft products have the same behavior. We have fixed this issue. If you use the PDF24 Creator 8.0.0 then you should update to the new version 8.0.1.

Version 8.0.0

(07.11.2016)

Feature: Option to overwrite existing files added to the auto save feature

The auto save feature could not overwrite existing files. If a file with the same name was already available, then a new unique name was generated under which the file was saved. Sometimes, overwriting existing files is desired and therefore we have added an option by which you can control that behavior. The option can be changed in the settings pages of a PDF printer.

Feature: New function in the PDF24 tray icon

Version 8 brings back some functions of the tray icon which were present in some older versions of the software. You can right-click the tray icon to open the context menu and then you can see all the functions of that icon.

Feature: Uses Ghostscript 9.19

The new PDF24 Creator installs and uses the latest Ghostscript 9.19 and the changes of this Ghostscript version are automatically part of this PDF24 Creator version.

Feature: Information shown when an image is copied to the windows clipboard

The screen capture function can copy captured screen images to the windows clipboard. When you use this feature you will now get an information box after the image is available in the clipboard.

Feature: Online PDF tools accessible from the launcher

The PDF24 Online PDF Tools (https://tools.pdf24.org) are now accessible from the PDF24 launcher. We have added a new tile in the app. The user can now get faster to the tools. You can disable this new tile via the DWORD value NoOnlinePdfTools=1 in the config.

Feature: Tooltip of a page element in the Creator shows the source file of the page

When you assemble a new document, which means when you drag images from one file to an other one, then you could not see from what file a specific page comes. The new PDF24 Creator shows that information in the tooltip of the page element.

Feature: Progress bar improved

The new progress bar has the ability to visualize a new state which is used if an operation takes longer than expected. The new mode is used after a specific time limit exceeds. The user then can see, that the operation takes longer than expected.

Feature: File icons added to the file tool

The file list of the file tool (file context menu -> PDF24) now shows file icons. This makes the tool friendlier and users can better distinguish between the files.

Feature: File operations of the file tool can be canceled

File operations of the file tool (file context menu -> PDF24) can be canceled by hitting the cancel button. The cancel button stops the whole operation and not only the current action. If an operation is consisted of a lot of actions, then you could click a lot of times until you would get the whole process terminated. The new behavior is better and easier to understand which makes the tool more attractive.

Feature: Batch processing of the file tool optimized

The batch processing mode of the file tool has been optimized so that it is now easier to use this tool. The operation window is now shared between the particular actions. Opening and closing new operation windows is no longer necessary. The benefit is a smoother process without the annoying opening and closing of windows. This makes it possible that the process can run in the background and you could do other tasks in the meantime. All the changes makes the tool ready for batch processing of multiple files.

Feature: Fax profile can be selected

There is now a fax profile which you can use if you want to save a PDF file with the quality of faxes. If you need a PDF files for faxing then you can use the fax profile which generates a PDF with a quality level of faxes. The new fax profile can be enabled/disabled by the config key NoFaxProfile (DWORD) [0, 1].

Feature: Delete print jobs with errors

Under a Windows system with multiple users it can be possible that a print job of one user can block print jobs of other users. If that happens, only an admin can unblock the printer by deleting the blocking job. This new PDF24 Creator can do this automatically. The config key DeleteJobsWithError (DWORD) [0, 1] can be used to enable and disable this feature. The feature is currently disabled by default. If you need that feature you can set DeleteJobsWithError=1 and then print jobs with errors will be deleted so that no print job can block others.

Feature: Save automatically under a specific user

You can now configure a PDF printer to automatically save files using a specific user. This can be done via the key AutoSaveUser (REG_SZ) of a PDF printer configuration. If you need to use this feature (e.g. because only this specific user has the necessary access rights) then you have to do the following:
  • Add a printer or use the default PDF printer and enable the auto save feature
  • Add the key AutoSaveUser to the config of the PDF printer in the windows registry and set the user name under which to save the printed files
  • Start a session under this user
  • Start the pdf24.exe in this user session
Print jobs of this PDF printer will then be send to this specific user where the PDF files gets saved.

Feature: pdf24.exe as a Windows service

The pdf24.exe can now run as a Windows service which has some nice advantages. Running as a Windows services fixes some multi-user issues from older versions. This Windows service is then the server for all PDF printers. All print jobs are handled by this service and gets redirected to the user where the GUI application opens. This fixes several issues. If e.g. a user has stopped his pdf24.exe process then the service can restart the pdf24.exe for the user so that the user can get his print job. This was not possible in older versions and if a user had stopped his pdf24.exe then the print job could not be redirected to the user which resulted in a print job stalling in the printer queue.
If you still need the old behavior, then you can switch back by setting ServerPerUser (DWORD) [0, 1] in the application config. The PDF24 service can then be stopped.

Feature: Cloud Print feature added

The assistant contains a new tile to print a document in the cloud. When you click on this tile, then the document will be transmitted to the PDF24 cloud print service app where you can print the file using a cloud print provider. This function can be disabled by the config key NoCloudPrint (DWORD) [0, 1]. Simply set NoCloudPrint=1 and the new tile is no longer available.

Improvement: A lot of core PDF functions optimized

Version 8.0 optimizes a lot of core PDF functions and fixes some potential bugs and deadlocks. Merging, splitting and assembling of PDF files should now run a lot faster.

Improvement: Creator loads files faster

The new Creator loads files a lot faster than older versions. We could eliminate the pre-loading step which gives the main performance boost. When you switch to version 8 you will notice that files now loads really quick and you will see the preview a lot faster. This helps you to work a bit faster with the Creator.

Improvement: File preview in the file explorer of the creator accelerated

The preview mode of the file explorer in the creator now loads preview images faster. Older versions could also have some special issues with the generation of the images and this version fixes that.

Improvement: PDF/A and PDF security can't be used together

The PDF/A standard can't have security enabled. The PDF24 Creator handles that and does not apply security settings when PDF/A is selected as the PDF version.

Improvement: Installer shows better status texts

We have added some more status texts to the installer so that you can now ollow the installation better.

Improvement: Time estimation of some operations optimized

We have optimized the time estimation of some operations in the application. The progress bar of these operations should now be more realistic. If an operation takes longer than expected, then the progress bar switches over to the new special mode to visualize an unknown end time.

Improvement: Faster print function

We could also accelerate the print function due to parallel processing of tasks. The print function is now often twice as fast.

Improvement: Faster merging of files

We have optimized the merge function and we could accelerate the process a bit. Merging of files should now be a bit faster.

Improvement: Improved calling Ghostscript and the Doctool process

The operating system limits the command line to a number of characters. When you process a lot of files, then this limitation could cause an unexpected result. We have optimized that and now you can process as many files as you like. You can now e.g. use the file tool (file context menu -> PDF24) with hundreds of files to batch process them. Windows explorer limits the number of selectable files to 100. If you would like to process more files with the file tool, simply copy all files into a folder and open the file tool on that folder. All files in that folder will then be used in the file tool.

Improvement: Optimized printer job file name determination

There where some issues with the file name determination under multi user environments. Sometimes a file name of a print job could not be determined if more than one user was logged in to the system. We have investigated the reason and we found the problem. The bug is now fixed and version 8 should provide the right name of the print job.

Improvement: Flickering in the file tool removed

The file list of the file tool could flicker a bit when the GUI was used. We could find the reason and we have fixed that.

Improvement: Language files updated

Language files are now up to date, but there are still some language keys which are not translated. We will update the language files with newer versions after we have finished our translation tasks.

Improvement: Operation window optimized

The operation window could run into a deadlock under some special circumstances. This problem is fixed.

Improvement: DocTool command line is now case insensitive

Case insensitiveness eases the usage of the doctool and that's the reason for this change.

Improvement: Online converter requests are no longer limited to one file

Online converter requests can now contain more than one file. The latest version of the online converter can process multiple files per request and this version of the PDF24 Creator uses this feature to submit more than one file if required. You no longer need to submit every single file, in order to get your files converted to PDF online.

BugFix: Tool-tip issue of hidden tiles in the launcher fixed

Tooltips of hidden function in the launcher came up when the user moved the mouse in the window. If you had e.g. disabled the fax function (NoFax=1) then the tile of this function was no longer present in the window but the tool-tip was still be shown when you moved the mouse above the actual position of the tile. This was a bug in our layout engine and we have fixed that.

BugFix: Profile selection did not show anything if the last used profile was deleted

Normally, the last used output profile is selected in the profile selection list view on the next start of the application. If the last used profile is no longer available then no profile was selected. We have optimized that behavior and now we select an other profile instead.

BugFix: Output profile PSD 150 DPI was broken

The 150 DPI option of the PSD output filter was broken. The problem is fixed now.

BugFix: PDF passwords can now contain umlauts

PDF passwords with umlauts were not encoded correctly so that a secured PDF file could not be opened with the same password. This version fixes this bugs and you can now use umlauts in your passwords.

BugFix: Fixes an issue regarding file icons

We have fixed an issue regarding file icons. Sometimes file icons could not be shown in the GUI. We have overworked relevant code parts and we could fix that issue. If you have problems with invisible file icons, then update to version 8.

Version 7.9.0

(05.07.2016)

Feature: CTRL+V support within the Assistant and compression tool

The Assistant and the compression tool now supports CTRL+V to add files. Drag & drop support was already available in older version and CTRL+V is now a second option.

Feature: Compression tool now accepts all file types

The compression tool now accepts all file types and not only PDF. Everything what can be converted to a PDF file can be compressed with that tool. If a file is not a PDF file then the compression tool converts the file first and compresses afterwards. Users do no longer need to do that manually.

Feature: Compression tool added to the assistant

We have added the compression tool to the assistant so that you can send the printed PDF file directly the the compression tool to tune the size of the PDF file.

Feature: A file can be dropped to the PDF24 Launcher

A file can now be dropped to the PDF24 Launcher. The Launcher then sends the file to the Creator where you can do something with the file.

Feature: Config option EmailInterface can be used in the HKLM config section

The config key EmailInterface can now be globally set in the application config section under the registry path HKEY_LOCAL_MACHINE\SOFTWARE\PDFPrint and HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\PDFPrint respectively. It's a bit easier for companies to set the option there instead of setting it for every user separately.

Feature: Extended the printer installer tool

We have extended the PDF printer installer application. We have added two new commands to install a driver only and to set a config of an existing PDF printer. We have also added a fax config profile which is now used for the fax printer which should improve fax results.

Improvement: New Windows Explorer context menu extension

We have implemented a new shell file context menu extension. We no longer use the cascading file context menu. When you open the context menu in your Windows Explorer you will see the PDF24 menu entry. When you hit that menu entry then a special PDF24 GUI opens where you can select a tool to run. This new mechanism is better for the PDF24 Creator. We are now a bit more flexible, we do not fall under the Windows limitations and extensions are easier to add.

Improvement: PDF printer description improved

We have improved the PDF printer description to fix custom paper size and orientation issues. We have also added new paper formats.

Improvement: Improved loading of multiple files within the creator

We have overworked the multiple file loading feature in the creator. The creator no longer pops up after each file loaded. Only the last loaded file brings the creator to the foreground so that you know when the last file is finished. The creator can now work in the background and you can do other things in the meantime.

Improvement: Author no longer automatically added to a PDF

When you save a file with the Save As dialog you can set document information like author, title and keywords. The document information section can be enabled and disabled. If this section was disabled, the created PDF file often contained an automatically generated author field based on the windows user name. We have modified that behavior and we no longer use that automatically generated author information.

Improvement: Auto rotate pages option are made more intelligent

The auto rotate pages option of the Save As dialog is no longer always enabled by default when you save a PDF file with the Creator. This option was enabled by default in earlier versions, but in some situations it's better to disable that. A lot of users forgot to disable that option after they have applied a custom rotation and so they got a final PDF file with an automatically applied rotation which could be wrong. We have optimized related parts and we now disable that option automatically when the user uses a custom rotation.

Improvement: The continue button of the Save As dialog now has the initial focus

The initial focus of the Save As dialog is now on the continue button so that you can hit the enter button to continue if you do not want to make changes in that dialog. A lot of users informed us that this would be a nice improvement for a future version for those who want to work a bit faster here.

BugFix: Files in the compression tool can no longer be added twice

A file already in the list of the compression tool can no longer be added again. You could do that in earlier versions but that was rather disadvantageous than beneficial.

BugFix: Fixed the debug console

Since our compiler changes the debug console could no longer handle line feeds correctly. The debug console could not be used with that bug. We have analysed related parts and we have fixed that issue and now the console prints out correctly.

BugFix: Fixed an app crash when printing a range of pages

Printing a range of pages could cause an app crash due to a logik bug in the page selection code. We have fixed that problem. Printing of the whole document and printing of selected pages worked as expected without errors.

Version 7.8.1

(23.05.2016)

BugFix: Fixed several issues regarding the screen capture feature

  • Fixed issues on systems with DPI scaled screens
  • Fixed cursor flickering when selecting an area on the screen
  • Fixed black screen issue
  • Fixed issues on systems with multiple monitors

BugFix: Fixed an auto save file name issue

There was a minor bug in the auto save feature when using an output profile for file types like PNG, JPEG or other image file types. The produced filename still contained a suffix.

Version 7.8.0

(28.04.2016)

Improvement: PDF Printer settings page improved

Settings of the PDF Printer page are now automatically applied when you change the current PDF printer or when you add a new one.

Feature: Variable $printerName added to the auto save feature

The new variable $printerName can be used in the auto save configuration. This variable will be replaced with the PDF printer name on which was printed.

Feature: PDF24 Mail Interface added

We have added the new PDF24 mail interface which you can use as alternative to the other ones. The other interfaces requires a locally installed mail application such as Outlook to send mails. A lot of users do not use such an email client. That's the reason why we have added the PDF24 Mail interface. This is a online service which can be used to send mails with PDF24.

Feature: Enable/Disable components via a HKLM

You can now enable/disable components via the registry settings under HKEY_LOCAL_MACHINE\SOFTWARE\PDFPrint or HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\PDFPrint.

Feature: NoUserOverride Flag added

The flag NoUserOverride can optionally be used in the printer service settings to prevent users from overriding the configuration of a PDF printer.

BugFix: Fixed Load on Creator option

You can select the application which opens when you print on the PDF printer. There is an option for the Creator. Sometimes the assistant opened instead of the creator because of a bug in the tool selection function. We have fixed that issue.

Version 7.7.0

(05.04.2016)

Feature: Support for multiple PDF printers

We have added support for multiple PDF printers. The changes of the software were a bit larger but now the feature is available. The installer installs you one PDF printer. More PDF printers can be added via the PDF Printer settings page. There you can find a PDF printer manager where you can manage and configure your PDF printers.

Improvement: Several minor improvements and fixes

This version brings some minor improvements and fixes. The following have also been changed:

  • Drag & Drop into the bottom bar of the Creator could crash the application
  • Fixed windows size issues of two GUI dialogs
  • PDF Printer installer tool extended and improved
  • GUI rendering engine extended so that the new PDF printer manager could be implemented
  • Improvements and adjustments of the installer

Version 7.6.4

(19.02.2016)

BugFix: Subject was not set in the Outlook OLE email interface

The new Outlook OLE email interface did not set the subject of the new mail object. The older MAPI interface does that. We have changed that, so that the subject is now the same as in the MAPI interface.

BugFix: Fixed issues regarding showing/activating the GUI's

We have fixed some issues with the GUI's. The Creator e.g. lost the maximized state at startup or when a new document was available. Sometimes the GUI's did not get activated when a new PDF was printed on the PDF printer, especially when the application was minimized. We have fixed several issues here.

BugFix: Click on the tray icon always opened the Launcher

A right click on PDF24 tray icon opens the context menu of that icon. If you clicked elsewhere on the screen to close the context menu, the PDF24 Launcher always opened. That was a bug and we have fixed that behavior.

BugFix: Fixed issues of the print feature

We have optimized the print feature of the Assistant and the Creator. The new version is a bit faster (sometimes twice as fast), shows a better status and fixes an issue with the "Print multiple copies" options.

Version 7.6.3

(08.02.2016)

BugFix: Print action of the Assistant did not applied the selected profile

The print action of the assistant did not applied the selected profile, so that e.g. the digital paper has not been combined with the actual file. The problem is fixed.

BugFix: Click on the embedded image could crash the application

A click on the embedded image of the application windows could crash the application. We have fixed that so that a click on the image now behaves correctly.

Improvement: Language file updates

We got some new translated texts and we have update the corresponding language files. Five language files more are now up to date.

Version 7.6.2

(01.02.2016)

Improvement: Screen Capture (user defined area) optimized

We have optimized the user defined area mode of the screen capture feature again. We have seen some more places where the tool wasn't that robust.

BugFix: GUI engine issue fixed

There was another small bug in the GUI engine which we have fixed in this version. The TAB key can normally be used to move the focus between the input fields but the bug caused an application crash instead.

Version 7.6.1

(29.01.2016)

BugFix: GUI issue of the Creator fixed

The Creator has a small bar at the bottom of the application window which was sometimes not visible so that you got odd GUI effects. We have fixed that problem in version 7.6.1.

Version 7.6.0

(28.01.2016)

Feature: Outlook OLE Email Interface as an alternative added

This version brings the new email interface Outlook OLE as an alternative. The new interface requires an installed MS Outlook on your computer. Older versions can only use MAPI as interface but MAPI has some issues when Outlook is the mail software. New Outlook Emails created via MAPI does not add signatures automatically. That's bad for users because they have to do that manually. The new Outlook OLE interface fixes that problem. You can switch to the new interface by changing the corresponding option in the settings. The new interface does not work if Outlook is not installed.

Improvement: Screen Capture feature optimized

We have tuned the Screen Capture feature a bit because users reported some odd effects with the new GUI. Sometimes the GUI was visible after the Start button has been hit. This version fixes that. We have also slightly extended the GUI.

BugFix: Window size issue fixed

In some cased the GUI engine had a problem to calculate the correct windows size. The size was sometimes some pixes to high which resulted in odd rendering effects. We have fixed that problem.

BugFix: Fixes issues with PDF-A and PDF-X generation

We have overworked the generation of PDF-X and PDF-A files which was incorrect in the last versions. Files generated with last versions did not pass all validation checks. We have overworked the relevant parts so that this version generate better files. You have to pay some attention with respect to the color model. You can select the model when you save a PDF file. When you want to generate a PDF-A file then you have to choose an ICC profile. The intended color model of that profile must match the selected model in the Save As dialog. Example: If you select an ICC profile which requires CMYK then you also have to select the CMYK color model in the dialog in order to generated correct PDF-A files.

Version 7.5.0

(18.01.2016)

Feature: New Launcher added

The Launcher is now a central element in the PDF24 Creator. The launcher is a small tool where you can see all the available tool of the PDF24 Creator (Creator, Assistant, Compression Tool, ...) and where you can open it. The PDF24 Creator contains several tools and now you have a tool which list all them and where you can open these tools.

Older setups installed you some icons in your windows so that you could open the PDF24 tools. This new version does not install these old icon shortcuts because we now have the new launcher. Now, the installer only installs you one icon shortcut which opens the launcher where you can open a specific tool.

Extension: GUI engine extended and improved

We have extended and optimized the GUI engine so that we can now do some more things with that engine. We have improved speed, fixed some layout bugs and added new features. You can now also use the TAB key to move the focus between input text fields. The overall speed of the new GUI should be better.

Extension: Paper size ArchE1 added to the PDF printer

We have extended the PDF printer description so that you now can now also choose the paper format ArchE1.

Extension: Drag & Drop of files into the Assistant

You can now drag & drop files into the file list of the assistant. You can drag & drop every file which can be converted to PDF. The file will be converted to PDF if the file isn't already a PDF file and shown in the list so that you can perform actions on that file.

Extension: Added more languages to the installer

We have added Ukrainian, Slovenian and Norwegian to the installer.

Improvement: Screen Capture feature overworked and improved

We have improved and extended the screen capture feature which is build in. We have added a GUI for that feature which helps to take screen captures. The GUI opens when you click on the screen capture button within the new Launcher. There you can select a mode and a target and you can start taking a screen capture.

The user defined area mode now supports multiple screens. You can select an area on each available screen which is connected to your computer. You can now also cancel the user defined area mode by hitting the ESCAPE key. We have also optimized the visualization of that mode. When you enter, you will notice the new light white transparent overlay on your screen. When you select a rectangle with your mouse, then we redraw that selected area without that overlay so that you can easily see what you have selected.

Improvement: Tray icon improved

We have also overworked the tray icon because the new features of this version made some of the functions located in the tray icon redundant. When you right click on the tray icon you can open the context menu of that icon. You can no longer do that with a left click. We have stripped-down that menu and we have removed all elements except the open and close one. A double click on that icon now opens the new launcher mentioned above.

Improvement: Highlight color in the file list of the assistant changed

The color is no longer the odd blue one because that does not fit into the design. We have changed that to a light gray. This is now also consistent with the PDF compression tool.

Improvement: Image export improved

When you export a document as an image file format, then the exporter creates a new directory where the pages gets stored. Each file in that directory represents a single page of the exported document. When the document itself only contains a single page, then you will now get a slightly different behavior. In this single page case the application now uses a second step which removes that directory and which saves the single file under the name of that directory, directly as image file. That is what most users desired.

Improvement: Assistant or Creator PDF printer targets

We have improved the PDF printer behavior in case of selecting the right tool for the printed file. If the assistant or creator is the foreground window than the printed file will be opened there. If both tools are open and none of them is the foreground window than we choose the tool depending on your settings. If only one tool is open, then we load the file there.

Improvement: Language file updates and corrections

We have updated and extended all language files. Some parts of the language files are still untranslated. If you like the PDF24 Creator and if you have some spare time then you could support this project by translating some text elements. There are some easy to read language files in language folder of the software which you can open with a text editor. Send us your translations so that we can update our files.

Bugfix: Application goes into background

A user has reported a bug that his application goes into background when he prints on the PDF printer. We have analysed that and we have fixed the relevant part which causes that. Now that should no longer happen.

Bugfix: Fixed a bug in the dialog of the join files feature

You can join you files by the PDF24 context menu option. This join feature lets you select the output file. When the output directory contains the name PDF, then the dialog behaved wrongly. We have overworked this part so that the behavior should now be correct.

Bugfix: Compression tool could rotate pages

The PDF file compression tool sometimes rotated pages in a PDF file. That behavior is wrong because this tool should not affect page rotation. It should only compress PDF files. We have fixed that is this version. The orientation of pages should be kept as is.

Version 7.4.1

(18.11.2015)

BugFix: A document could be shown in a wrong user session in a multi-user environment

If an user had closed his pdf24.exe and printed on the PDF printer then the printout could be shown in an other user session. That was wrong. We have fixed that in version 7.4.1. Now, if a printout can not be shown in the right user context, the printout remains in the windows printer queue until the file can be printed or until the user removes that document there.

BugFix: Missing quotations marks at the autostart entry

There where no quotations marks at the pdf24.exe autostart entry. We where told that this is required. We have added these ones.

Version 7.4.0

(05.10.2015)

Feature: New tool to compress PDF files

The main change of this version is the new PDF compression tool. This tool can be used to compress existing PDF files by manipulating some parameters which reduces the size of PDF files. The tool is very easy to use. Just open it, add PDF files, modify the default settings if you like and have a look at the resulting size. If the new size is acceptable, save the compressed PDF files. You can also open the compressed file to ensure that the quality of the compressed file is good enough.

Improvement: Operating window optimized

We have optimized the operating window because we have seen some problems under certain conditions. The window could block an operation and could not be closed in that state. We have overworked the relevant parts so that the problem should be fixed.

Improvement: Optimized determination of printer job file names

If the name of a print job is very cryptic or if the name represents an URL it's a bad decision to choose that name as a file name because the name can also contain some bad characters. The file chooser dialogs warns the user in that case. We have optimized a bit here. We replace bad characters and use alternative names if the name is very long.

Improvement: Tooltips improved

The software uses tooltips to explain the tools. Tooltips in old versions where a bit limited. We have improved that parts so that tooltips can now also be multi-line and displays at better positions. Now we can show better and longer texts which helps to understand that tool better. The new compression tool uses the new tooltips.

Version 7.3.1

(14.09.2015)

Uses again the older Ghostscript 9.14

This version installs and uses the slightly older Ghostscript 9.14 instead of the latest version 9.16. We have seen some problems with Ghostscript 9.16 so that we decided to switch back. Problems with Ghostscript 9.16 are the following: Unable to load files with umlauts. Unable to process some PDF files with minor errors whereas Ghostscript 9.14 can process them.

Version 7.3.0

(09.09.2015)

Extension: F2 key to change the name of a document in the creator

You can now change the name of a document by pressing the F2 key when you have selected a document in the document list. You can select a document by clicking on it. The F2 key opens a form where you can enter a new name.

Extension: Auto generation of owner password

To apply PDF security settings an owner password is required which you had to enter in the form. You now can apply security settings without to enter this password. The PDF24 Creator generates a random one for you when you leave the password blank.

BugFix: Change of PDF printer tool

The PDF printer tool could sometimes not be changed via the preference pages of the application. This was a bug and we have fixed that. Users who had errors should now be able to change the tool.

BugFix: First try to fix the "Error writing to output file" error

Some users could not save PDF files. They got the error "Error writing to output file". We do not know the exact reason why that happens but we have an idea what could cause that error. This version tries to fix that bug.

BugFix: Not removed temporary files

Sometimes the creator where unable to delete some temporary files which where used by the application. We have found two new places where that could happen and we have implemented a fix for that.

Improvement: New logic to load files into the creator

This version brings a new logic to load files into the creator. Some users have reported that they had font and character issues when they merge files. We have found a solution for that with the new file loading mechanism. The new procedure is a little bit slower than the old one but not too slow and fixes the mentioned bugs.

If you feel bad with the new procedure you can reactivate the old behavior by pressing the CTRL key while loading a file or you can change the registry DWORD value CreatorDirectPDFLoad to 1 within the user settings of the app.

Improvement: PDF security now possible together with file enclosures

Automatically appending and/or prepending a file to the actual one could not be combined with PDF security options. The generated PDF file had no security settings applied. This is now possible.

Version 7.2.0

(01.09.2015)

Extension: Print function added to the Assistant

The Assistant has got a new function. You can now print a document directly from the Assistant on a printer available in your system. That is a cool thing, e.g. to use the PDF printer as print preview. Print on the PDF printer if you need a preview. The Assistant opens. There you can open a preview by clicking on the corresponding button. If all is fine then print on a physical printer directly from the Assistant.

Improvement: PDF print feature optimized

Version 7.2 brings an optimized PDF print function. The function has been revised and optimized.

Extension: Open output profiles from the Assistant

There is a new link in the footer of the Assistant. A click on that link opens the output profile view where you can manage your profiles.

BugFix: Fixed default page rotation settings

The setting value to rotate pages automatically based on the text of the document is normally activated by default. This was not the case in the last versions. We have fixed that so that pages will be rotated automatically if you do not choose an other option.

Extension: Output profiles extended and bugs fixed

RGB is the default color model if you do not choose another one.

The JPEG compression is now the default one for color and gray scale images. PDF files should now be a little bit smaller in size than PDF files produced with older versions. You can change the compression method and the JPEG compression quality when you save as PDF.

We have also added a new section to the PDF filter. You can now convert the colors of a file by choosing one of the color convert options of the corresponding select field. You can, for instance, convert colors to gray-scale.

We have also fixed a bug in version 7.1.0 regarding the color model and color conversion. Version 7.1.0 could produce PDF files which could not be opened.

The PDF filter areas has been reorganized to improve the usability.

Extension: GUI Layout Engine extended

We had some issues with keyboard events which where not passed correctly to parent components. That was the case why the console of the Assistant could not always be opened by the F12 key.

Extension: Overlay-Feature added

Version 7.2 brings the new overlay feature. In addition to the paper feature you can select an overlay PDF file. The content of that file is combined with the content of the actual file so that the content of the overlay file is on top of the content of the actual one. That is the opposite compared to the paper feature. You can use that feature to brand a file, to add a complex watermark or as alternative to the digital paper when the content of the actual file hides the content of the paper.

Extension: Updated the language files

Version 7.1.0

(26.08.2015)

Improvement: Better PDF printer configuration

The installer of version 7.1.0 uses a better PDF printer configuration. TrueType fonts are now downloaded as softfonts by default. This fixes a lot of bugs related to font problems such as font substitution or character issues. User who had problems with fonts should try this version.

Extension: New user configuration options

The user configuration now has the option keys NoOnlineConverter, NoShellContextMenuExtension, NoShellFileContextMenuExtension, NoShellDirectoryContextMenuExtension, NoShellBackgroundContextMenuExtension, NoEmbeddedBrowser. All of these options are of type DWORD. A value of 1 disables the corresponding feature whereas a value of 0 leaves that feature enabled. Al of these options can be manipulated via the settings of the software.

Extension: Some extension in the settings interface

There are two new sections in the interface. The first one is the Explorer context menu section. Here you can enable/disable all or some of the Explorer context menu extension features. The second section can be used to control the features of the application where you currently can enable/disable the PDF24 Online Converter as fall-back tool. The interface itself can now new resized, minimized and maximized. We have also optimized the left pane of the windows.

Extension: The setup now installs the latest Ghostscript 9.16

Extension: Updates of language files. Please send us translation of the new texts.

Version 7.0.7

(18.08.2015)

BugFix: Issue with pinned directories under Windows 10 solved

Opening a pinned folder under windows 10 mysteriously started the PDF24 DocTool application. Version 7.0.7 brings a workaround which fixes this behavior. We currently do not know why Windows 10 is doing that. We hope that we will get some more information about that new behavior in order to implement a better solution.

Extension: -profile flag for the join operation of the DocTool

We have added a profile flag (-profile PROFILE_ID) for the join operation of the DocTool to apply that profile after having joined the input files.

Version 7.0.6

(21.07.2015)

BugFix: Page-Extract-Dialog could not be opened via tools menu

The page extract dialog could not be opened via the tools menu of the creator. We have fixed that issue.

Extension: DocTool command line documentation

We have added a documentation of the command line of the DocTool. Calling the DocTool without command line arguments prints the documentation on the screen.

BugFix: Multi-Page-Tiff output broken

Multi-Page-Tiff files could not be generated with the corresponding output filter of the Save As dialog. We have fixed that too.

Version 7.0.5

(13.07.2015)

BugFix: Append a file via profile was broken

Version 7.0.0 introduced a new feature to append a file at the beginning and at the end to the actual one via a profile. There was a bug in appending a file at the end. Appending a file at the beginning worked, appending a file at the beginning and at the end worked to but appending a file at the end only was broken. Version 7.0.5 fixes this bug.

Version 7.0.4

(07.07.2015)

BugFix: Assistant opens in background

Users have reported that the windows of the assistant opens in background after you have printed on the PDF printer. That's a bit annoying. We have solved that problem in version 7.0.4.

Version 7.0.3

(06.07.2015)

BugFix: Preview of the assistant broken if a PDF password is inside a profile

When you select a profile which contains a PDF password and when you click on the preview button then the preview opens without showing anything. We have fixed that problem.

BugFix: Profile with PDF password without using the Save As dialog wrongly applied

When you use a profile which contains a PDF password to save the actual file without the Save As dialog then the password inside the profile was wrongly applied and you could not open the PDF file with the password you have entered. The PDF24 Creator encrypts the password and stores it inside the registry. Without the Save As dialog we forgot to decrypt the password before applying it to the PDF file so that you could not open the file with your password. That problem is fixed.

Version 7.0.2

(02.07.2015)

BugFix: Normal page view of the Creator broken

There are different views of a document inside the creator. There are different previews and there is the normal page number view. The normal page number view was broken because there were missing images in the bin file. We have fixed that.

Version 7.0.1

(01.07.2015)

BugFix: Assistant App Crash when PDF24 fax is not installed

If PDF24 fax is not installed then the assistant could not start but rather crashed at startup. That problem is fixed in version 7.0.1.

Version 7.0.0

(24.06.2015)

Extension: Extensions and improvements in the assistant

Version 7 brings a revised wizard that has been improved in many ways. On the left there is now a file list which contains the printed files. The center pane of the application contains the file action buttons which are now better than the old ones. The buttons are larger and have icons and text and better mouse effects. Above the list, there are some buttons to manage the list. Joining all documents in the list is also possible. You can select a document in the list and you can perform an action on that document by clicking on one of the action buttons.

We plan to make the action buttons customizable so that you can add or remove buttons. We will introduce that feature with a future versions. The benefit of that customization is that you as a user or as a company can add some more buttons to add functionality you need. Write us so that we can discuss that feature so that we can develop in the right direction.

Feature: Integration into Windows Explorer context menu

There is now an integration into the Windows Explorer context menu. By clicking the right mouse button on a file or in the background of the explorer, the normal context menu opens. This menu now contains the PDF24 sub-item.

The following functions are available for file via the PDF24 context menu:
  • Open selected files with the Creator for further processing
  • Print selected files on the PDF printer
  • Split selected documents page by page
  • Optimize selected documents for the web
  • Join all selected documents to one PDF
  • Send selected documents by e-mail
  • Send selected documents by fax
  • Apply an output profile to selected files
  • Extract page from the selected files
  • Convert selected files to ...
  • Convert selected files to PDF
  • Convert selected file to PDF online
The following functions are accessible via the PDF24 explorer background context menu:
  • Import From Scanner or Camera
  • Import from the clipboard
The background context menu is the context menu that opens when you click with the right mouse button into the blank area of ??the Explorer or your desktop.

Improvement: Improved command lines of some tools

When it comes to the command line of the PDF24 Creator tools, some improvements have been made. Some arguments have been revised, removed, added and unified in order to facilitate the work with the command line. The command line interface will be documented later.

BugFix: Prevent from opening twice

Under certain circumstances, some tools could open twice, which is not wanted for some tools. The Creator, for example, should be opened only one instance, because this instance can handle multiple files. Under certain conditions, it was still possible that the tool could open twice. The problems should be fixed.

BugFix: Fixed a bug in the PS and EPS output filter

The output filters for the file types PS and EPS was broken. We have fixed and optimized the relevant parts and now you should be able to save as PS and EPS.

BugFix: EPS filter creates one file per page

An EPS file contains one page per file. The output filter in the PDF24 Creator was not correct, so you could always only save the first page of a file. This problem is now fixed. The output filter for EPS now creates a folder containing the files of each page.

BugFix + Improvement: Drag and Drop fixes and improvements

The drag and drop implementation has been improved so that more things are possible here which can be used by the tools. Version 7 also fixes some other minor bugs within the implementation.

Improvement: Output filters for image files improved

When you save a document as an image, then one image file is created for each page of that document. The output filter has now been extended so that the filter always creates a folder with the page image files of the document. The user has to choose a destination file. The filter creates a folder under that name and saves the page image files into that folder.

Improvement: Moved the Page-Extract-Dialog from the Creator to the DocTool

The Page-Extract-Dialog is now part of the DocTool. The advantage of that change is that the DocTool can now be used to open this dialog for a file.

Improvement: Page-Extract-Dialog enlarged and improved

The Page-Extract-Dialog is now slightly larger and the usability is now better.

Improvement: Process-Status-Dialogs can now be reused

Some operations executes minor sub task which would normally open and then close the process dialog. This is annoying for some operations. One dialog instance can now be shared between some tasks and the tasks itself only change the status of the shared status window instance.

Improvement: Clipboard handler of the DocTool optimized

If there are files in the clipboard, then the DocTool can extract these files and now also communicates the names of these files correctly. Older versions did not used the document name so that the name could not be used in the tools.

Feature: Extended the DocTool

We have added a lot of new features to the DocTool. Almost all the functions that are present in the PDF24 Windows Explorer context menu extension uses the DocTool to execute the corresponding operation. The functions can be executed from the command line. We will document these functions later.

One example of what you can now do with the DocTool is to join multiple files to one.

Extension: Extended the GUI layout engine

The GUI engine has been extended and improved in some points and some components (e.g. the assistant) uses that new features.

Improvement: Improved the language file module and all language files

Language files can now have some properties in the file header and the language module can read these properties. The PDF24 Creator uses these properties to determine the language at first application start and to display better language names in the setting page.

We have added Norwegian as new language file. A lot of files are fully translated, but there are still some files with missing parts. The English language file is used for all missing elements. Translations are usually contributed by users. If you can translate and if you have some minutes, you are welcome to translate missing parts.

Improvement: File names when printing in a browser

When browsers print they often send file names which represents URLs or parts of URLs. We now take that into account and to our best to determine a file name of that submitted name.

Feature: Append and/or prepend a file to the actual one

The PDF output filter has a new feature to attach a file automatically to the actual one. You will recognize the new element of that filter when you open the Save As dialog. The files can be stored into a profile so that you can apply a predefined profile to printed files. This is a good feature e.g. if you want to append some terms or other information automatically.

Improvement: Save As dialog optimized

We have seen some effects in older version of the Save As dialog which could be optimized. Loading a profile is now faster. Older version have a bug and load profile twice because of some events. File select elements could sometimes not be stored/loaded into/from a profile.

Improvement: Prompt for "The document XXX is not yet saved ..." optimized

The prompt of "The document XXX has not been saved. Do you want to save it?" also appeared if you have only loaded a document. It would be better to show that message only if the document has been modified. We have implemented that in this way.

Improvement: Updater optimized

The GUI, update request, downloading and error handling have been improved. The behavior especially in cases of errors where not satisfying in older versions.

Improvement: Layout fix in the Creator at DPI levels not equal to 96

The Creator is optimized for DPI levels of 96 DPI but can also be used at other DPI values. Version 7.0 fixes the to large spacer bar between the toolbar and the file path element of the explorer inside the creator.

Improvement: Citrix Multi User session fix

If a user is logged in multiple times and if the user prints on the PDF printer then the assistant opened in one of the user sessions but not necessarily in the session from which was printed. That was bad. We have optimized some parts in order to fix that behavior. If you still have problems with that, please contact us.

Version 6.9.2

(28.11.2014)

BugFix: Fixes some issues regarding the auto conversion of documents

Sometimes the default printer was not changed back after having changed temporarily to convert a file to PDF. This version fixes that and resets the printer as default which where the default printer before. Another problem was the conversion of Excel files when the PDF24 PDF printer was not the default printer. In that case the conversion failed. That's also fixed.

Version 6.9.1

(12.11.2014)

BugFix: Fixes application crashes in version 6.9.0

Some users reported us application crashes in version 6.9.0. We investigated the problem and found a part which caused the crashes. Version 6.9.1 brings a fix for this issue.

Version 6.9.0

(11.11.2014)

Improvement: Optimized auto save feature

We have improved the file save method of the auto save feature. In previous versions a created file could be overwritten with the next auto saved file if the next file was produced to fast. We now have a better file locking mechanism so that we can make a file name unique if there is already a file with the same file name.

Improvement: Better support for converting MS Office files to PDF

We have optimized the auto conversion of MS Office files so that these files can now be better converted to PDF. These files are now handled in a special way.

Feature: Support for the backspace key within the file explorer list

We have added support for the backspace key within the file explorer list to change to the parent folder of the currently opened one.

Improvement: Improved label editing within the file list

We also improved label editing within the file list view of the file explorer when a link is to be edited.

Improvement: Improved the file explorer list in point of speed

The file list is now virtual and a lot of faster then the list of previous versions. If you open a folder with only a few elements than you will not notice the faster list but if you open a folder with some thousand elements then the speed difference is very large. In previous versions you could wait some seconds until the list was ready and now this will only took some milliseconds. Some companies have really large folders and waiting is really annoying.

Improvement: Improved the file explorer tree

The file explorer tree no longer shows the current folder of the file list view because this reduced the file explorer speed in some cases. You can still navigate by the directory tree to open folders and the list shows the currently opened folder of the tree but in the other way this is no longer the case. This greatly improves the speed and the behavior is now more like the Windows explorer. Furthermore we have optimized some other points to make the tree faster.

Improvement: Optimized the start condition of a Drag & Drop operation in the explorer tree

Sometimes the Drag & Drop operation was initiated to fast which was not necessary. We have optimized that part to get a better behavior.

Feature: Added an input field for the currently opened folder

We have added an input field which shows the currently opened folder. The path of that input field can be edited by the user to change the path by hitting the enter key.

Improvement: Updated some language file.

Version 6.8.0

(13.10.2014)

BugFix: Fixed an auto save issue

Added the auto save command quote fix. Some commands could bot be executed because of a quote character problem.

Improvement: Improved double clicks within the file explorer

Optimized the double click behavior in the explorer list. Older versions also started a drag & drop operation which was not necessary. We have optimized that a little bit to distinguish better between the beginning of a drag & drop operation and a double click.

Improvement: Optimized Drag & Drop

Drag & Drop optimized, especially when dragging files from the PDF24 Creator and dropping them into the Windows Explorer or other applications.

Improvement: Optimized Ghostscript calls

The app now uses absolute paths to call Ghostscript because an installed Ghostscript into the system32 folder would run this Ghostscript instead of the PDF24 delivered version.

BugFix: Fixed an unsynchronized access issue

Fixed a potential app crash issue caused by an unsynchronized access of the file icons and file thumbnails within the explorer list of the creator.

BugFix: Fixed a PDF lib issue

Fixed a bug in the PDF lib. Some special PDF files could not be opened in earlier versions.

Version 6.7.0

(04.07.2014)

Feature: PDF24 Creator can use the PDF24 Online PDF Converter

The DocTool can now use the PDF24 Online PDF Converter if necessary. If there is no local application which can print a file on the PDF printer in order to convert the file to PDF, then the user will be asked to convert the file online with the PDF24 Online PDF Converter. If he agrees, then the DocTool sends the file to the service to get it converted to PDF.

BugFix: UrlLib issue fixed

Fixed an issue with the UrlLib, which could create wrong URLs.

Improvement: Language file fixes and updates

Improvement: Optimized auto save feature

You can now use placeholders when specifying the folder, where to save to file. Available are date and time placeholders like %Y, %m, %d, %H, %M, %S as well as environment placeholders like %USERNAME%, %USERPROFILE%, ....

Version 6.6.0

(26.06.2014)

Improvement: Control of default printer optimized

The DocTool sometimes have to change the users default printer to the PDF24 PDF printer in order to convert a file to a PDF. This change is reverted after the conversion is finished. We have optimized this part of the code within the DocTool.

Improvement: Mutex Locks optimized

The DocTool uses mutex locks to synchronize DocTool executions. We have optimized here so that these locks will be used only when really necessary.

Feature: DocTool now has a shell print command

The DocTool can now be used to execute a shell print command on a file to print the file on a printer.

Feature: DocTool can create PDF files from clipboard content

This is a cool feature. You can use the DocTool to e.g. create a PDF file from an image which is in the clipboard. If the clipboard contains a file reference then this file will be converted to PDF.

Feature: DocTool can do file uploads

The DocTool can now be used to upload files to internet services.

Improvement: Converting files with the PDF printer optimized

We have optimized how we access the PDF printer to convert files to PDF. In previous version the message "Could maybe not be converted" where shown relatively often because we did not know whether the conversion is possible or not. Here comes the optimization. We have optimized that so that we now better know whether a conversion is possible or not.

Improvement: Special handling for Word, Excel and PowerPoint files no longer required

There was a special handling for Word, Excel and PowerPoint files to convert these files to PDF. This is as of now no longer required because of the optimization above. If a print command is available for a specific file type then this file can be converted to PDF.

Improvement: Drag and Drop file import order optimized

The file import order now exactly matches the order of the submitted files via the drag & drop action. Older versions could break that order which was bad in some cases where the order is crucial.

Version 6.5.0

(04.06.2014)

BugFix: Fixed a bug in the PDF lib

There was a bug in the PDF lib which caused an application crash when reading some special PDF files. We have fixed that one.

BugFix: Image of the progress window did not scale

The progress windows was optimized for 96 DPI. Higher DPI settings caused a gap at the right side of the window which was a little bit ugly. We have fixed that issue and now the progress windows is DPI aware.

Improvement: Moved a settings area

We have moved the block PDF Printer Tool from the general element to the PDF Printer element because this block is more related to this section.

Feature: Progress window can be disabled in auto save feature

The progress window could be annoying when saving a lot of documents automatically. The window can be disabled in the settings in the auto save section.

BugFix: Language files fixed

There was a wrong key element in all language files so that there was a not replaced placeholder in the save as dialog. We have corrected that.

Version 6.4.1

(14.05.2014)

BugFix: TWAIN Import Bug fixed

We have fixed a TWAIN import bug in version 6.4.1. Some users reported issues with that feature. Sometimes it worked with no problems and on other PC's or other drivers it was broken. We have investigated the issue and we have rewritten some code parts with the hope that this should solve the problem. If you have problems with the TWAIN import part please report your problem in our support forum.

BugFix: Files were not signed in version 6.4.0

The build process was broken so that the files and the setup itself were not signed with the Geek certificate. We have fixed that.

Improvement: TEMP directory detection improved

Some users reported that PDF files could not be created. One problem was die TEMP directory bug so that temp files could not be created. We have optimized the part which determines the TEMP directory and that should solve the problem of some users.

BugFix: Drag & Drop Bar fix added

When dragging and dropping pages of documents a vertical bar is drawn which indicates the insert position. Sometimes this bar were drawn with an invalid height so that some areas were overdrawn. This is now fixed.

BugFix: PDF color model fixes added

Users can select the color model when saving a PDF file. We have fixed some parts here so that the selected color model should now be correctly applied to the document. If you now save a PDF and if you select the gray color model than the final PDF file will be gray-scaled.

Version 6.4.0

(06.05.2014)

Improvement: Ghostscript 9.14 is now shipped with this release

Improvement: Language file updates

Affected language files: German, Italian, French, Lithuanian, Czech

Improvement: Setup translation updates of several languages

BugFix: Fixed a minor bug in the PDF24 PDF lib

The bug could cause an application crash when the user loads a special PDF file.

Version 6.3.2

(07.02.2014)

BugFix: Removed debug message from the DocTool

There was a debug message in the DocTool which was shown after using the DocTool. This version removes this debug message.

Version 6.3.1

(05.02.2014)

BugFix: Fixed issues with the save as dialog

Fixed a major bug introduced in version 6.3. Entered values in the text boxes of the save as dialog could not be correctly read by the app so that they were not used in saving process. Default values were used instead. Passwort protection for instance could not be used although correctly entered all fields.

Improvement: Optimized environment variables

Improved the environment variables of the apps so that the pdf24 apps itself can be used in auto save mode without to use the whole path of the app.

Improvement: Further optimized focus optimization from version 6.3.0

We improved the focus optimization from version 6.3.0. The problem was that if you have clicked into a form element and if you have moved the mouse out of the element then the form element lost its focus so that you could not enter text. The mouse had to be in the element to enter text. That was a little bit bad and we have optimized that so that you now can click into an element and you can move the mouse a little bit away and the element keeps its focus.

Version 6.3.0

(04.02.2014)

Improvement: Overwriting files in auto save mode

The PDF printer auto save feature now does not overwrite existing files any longer. Now, if a file exists, a suffix is appended to the file name under which the file will be saved.

Update: Update of language files

The following files has been updated: English, Polish, Finnish, Lithuanian, Czech, Spanish, Italian

Improvement: Moved file name erasement options

The file name erasement options are now part of the PDF printer page.

Improvement: Supported placeholders added to the form

Supported placeholders in the settings pages are now visible in the GUI.

Improvement: Scrollbar issues fixed

Sometimes scrollbars where shown where they wouldn't be necessary. We have optimized some GUI parts so that now scrollbars are only visible if they are really necessary.

Improvement: Focus change between areas optimized

Now, some windows gains the focus when the mouse moves into this windows. This improves usability in some dialogs where user can scroll so that no click is needed any longer to get the focus which activates scrolling for that window.

Improvement: ADMIN suffix in settings dialog title

The settings window now has the title suffix ADMIN when the settings dialog is opened with full administrator rights to change special settings.

Feature: Custom command in automatic save mode

We have added a custom command feature to the PDF printer auto save mode. The feature can be enabled and configured in the PDF Printer pages of the application settings.

Feature: ShellPrint command added to the pdf24-docTool.exe

Now there is a shell print feature in the pdf24-docTool.exe. The command pdf24-docTool.exe -shellPrint -printerName FILE can be used to print out a file on a printer using the shell print windows feature. The can be used together with the auto save feature of the PDF printer to print out a file on another printer.

Feature: ALT key to break auto save mode

Now you can use the ALT key to break the auto save mode of the PDF printer. If auto save is enabled and if you print on the PDF printer, the printed file is then normally saved to a file. You can temporarily break this by keeping pressed the ALT key when sending a file to the PDF printer. This opens the PDF24 assistant or the PDF24 Creator where you can handle the file as if you don't had activated the auto save mode.

BugFix: Custom profile in auto save settings page

We have also improved the custom profile selection in the auto save settings page. The custom profile was not shown as selected after having been selected.

Feature: Custom profile when saving automatically

When the custom profile option in the auto save setting page is selected then the format option dialog will be opened after printing a document on the PDF printer. There you can make custom settings which will be used when saving the file.

Version 6.2.0

(12.12.2013)

BugFix: Added a TWAIN fix

Added a Twain fix which could cause an application crash in some circumstances

BugFix: Preview generation could cause application crash

The PDF24 Creator could crash if the user drags & drop pages from one document to another while the preview generation of the documents is still in progress.

Improvement: Faster preview generation

The preview generation in the PDF24 creator is now more parallel. This is faster on CPU's with multiple cores.

Improvement: Custom page size section of the PDF printer driver optimized

Optimized the PDF printer driver in terms of custom page sizes. Sometimes the wrong page size was used.

Improvement: ParseDSCComments is now enabled

This parses the DSC comments and add that information to the target document.

Update: Updated all language files

We have updated all language files and added some new elements too, which are currently not fully translated. We update the files on a rolling basis as soon as we get translations from the translators.

Version 6.1.0

(04.12.2013)

Improvement: Default file name for the auto save feature

The default file name for the auto save feature is %Y-%m-%d %H-%M-%S $[+fileName+]. This is a time stamp and the name of the file, if the name is available.

Improvement: PDF24 Tray menu can be opened with left mouse button

You could only use the right mouse button to open the PDF24 tray menu, but the left mouse button is also good for opening the tray menu and so we added the additional handler for the left mouse button.

Improvement: Settings module optimized

Changes in settings now better takes effect in running modules so that no application restart is necessary for a lot of changes. For instance now you can change the auto save feature without to restart the pdf24.exe backend module.

Improvement: Layout orientation (horizontal/vertical) is now saved in profile

Now the setting is in profile so that a application restarts don't change the layout.

Improvement: File extension handling via printer interface is now more intelligent

Known file extension are removed from the name which was determined from the printer interface. This is mostly OK and now you don't have the original extension in the name.

Improvement: Updated translation files

The language files Czech, Finnish, Italian, Japanese, Lithuanian, PortugueseBrazilian, Swedish where updated. Here is thank you to the translators who sends us updates.

Feature: Send To entry for the PDF24 Creator

The setup adds a Send To entry for the PDF24 Creator. Now you can easily send files to the Creator which then will be converted to PDF.

Version 6.0.1

(28.10.2013)

BugFix: Fixes a bug when saving without GUI

Version 6.0.0

(28.10.2013)

BugFix: Reworking of digital paper feature

Integration of digital paper into the document was erroneous if the PDF files was of a newer standard (1.5 and above). We have solved that issue in this version.

BugFix: Extra page when adding watermarks

An extra page was added to the document when the watermark feature was used. This bug is solved.

Improvement: Renaming of PDF24 Editor to PDF24 Creator

The PDF24 Creator itself is consisted of the PDF printer and a tool called PDF24 Editor, which can be used to compose/edit files page-based. Users also expected that they can also use this tool to edit the content of PDF pages, but that is not possible. The tool can do something with whole pages but the content of pages can not be manipulated. That is the reason for the renaming and we think the name Creator better reflects the possibilities of that tool.

Improvement: Ghostscript 9.10 is now used

This version now uses the latest Ghostscript 9.10.

Feature: Screen Capture to clipboard

A lot of users desired the Screen Capture to clipboard functionality as option besides the Screen Capture to PDF feature. The new feature is now part of the software and is accessible through the PDF24 tray icon. A new menu group was added to the tray icon which contains the new tools.

Improvement: Changed a license part for the good of the user

There was a license part which stated that some parts of the software will be disabled after 6 month usage without update. This part is now no longer part of the license terms. Nothing is disabled after 6 month usage. Now, the user will only see an update information if an update is available and recommended for installation.

Feature: Default save folder = source folder of loaded file

This little change eases the usage of the PDF24 creator because the folder of the loaded file is often used to save the new file after doing some modifications.

Improvement: "Target could not be found" issue fixed

The warning was shown in the PDF24 Creator if a shortcut could not be resolved. Now this warning will not be shown if the PDF24 Creator opens.

BugFix: Fixed the page from .. to feature when saving files

The page from ... to fields where sometimes not recognized. This version contains fixes in the corresponding parts so that the problem should be solved.

Improvement: Fixed some GUI issues

Some GUI elements where not displayed correctly, especially when the default DPI settings was changed. Some GUI parts of the application scaled in a wrong manner so that it was not possible to work with that parts. We have optimized the parts so that the program can also be used on screens with higher DPI values.

Improvement: Save as Dialog cut on screens with resolution of 1280 x 1024

We have overworked the GUI of the Save As dialog so that a screen with 1280 x 1024 Pixel should no longer be a problem.

Feature: New output filter TEXT added

The new filter can save as text, currently in the encodings UTF8 and UCS2.

Improvement: Restructuring of the settings

We have added some new options to the settings pages which could not be integrated into the old structure. Therefore we have changed a little here.

Feature: Open PDF file after storing it

Now, there is also the feature to automatically open a saved PDF file. This eases the work flow PDF printer -> Assistent -> Save -> Open

Improvement: Extended language files

We have extended all language files and made them up to date so that all files have all keys. Some files are currently not fully translated. This will be done by translators and we will add the missing parts as soon as we get it.

BugFix: Resetting the default printer

Resetting the default printer was not executed in some parts so that the PDF24 printer was left the default one. We have fixed that for the known parts.

Feature: Auto-Save feature added

Files can now be saved automatically without GUI interaction. The feature can be controlled by the settings. You can define the folder where to save, a file name pattern and a profile which shall be applied when saving. If that feature is enabled and if you print on the PDF printer then the printed document will be saved automatically into the defined folder. You can also define whether the folder should be opened after the file was saved.

Improvement: Optimized the print feature

The PDF24 Creator has a print feature by which the current selection can be printed. Sometimes the print quality was bad especially when printing high resolution documents. We have improved that part so that the quality is better and can also be better controlled by the DPI setting in the printer property pages.

Improvement: Umlauts and other characters are now usable when saving to PDF

Older releases had some issues with umlauts and other characters outside the ASCII range. Issues where related to the following subsections of the PDF output filter: Watermark text, PDF meta data such as title, author and keywords, PDF/X and PDF/A settings and PDF passwords.

Version 5.7.0

(22.07.2013)

Feature: Faster loading of PDF files in PDF24 Editor

Loading PDF files with the PDF24 Editor is now faster then in older version. Try it out, the difference is really noticeable.

Improvement: Prints ENV information when the debug console opens

This information is often necessary when analysing user problems. That's the main reason why we have added this feature.

Feature: PDF printer driver overworked

Now there are a lot more predefined paper sizes the user can select.

BugFix: PDF-X color bug fixed.

Sometimes colors got converted when the file was saved as PDFX.

New language files Slovenian and Ukrainian

Version 5.6.0

(10.06.2013)

BugFix: Fixed an issue with the file name of the email as feature

After clicking on the send as email button an input form pops up where the user has to enter a file name for the file of the email attachment. There was a character encoding bug which caused unreadable names when attached to the email. We have fixed that.

Feature: Email subject line is filled with the file name

The email subject line is automatically filled with the documents file name so that the user does not need to enter the name into the subject line. This feature was often wanted to speed up the process.

BugFix: Fixed an issue with the PDF info meta information

The PDF info meta information could be set when the source document already had an information block. We have changed the code parts so that the information can also be overwritten when already available.

Improvement: Optimized language file parts for the assistant

We have optimized the assistant/* parts so that the key are more correct with the respect to the intention inside the assistants GUI. Furthermore we have optimized the order of the buttons.

Improvement: More room for button text

We have removed the icon of the button which was equal to all buttons. Now there is more place for the text which we already use for the languages German and English.

BugFix: PDFX issue fixed

The application could crash when the user has chosen the PDFX output format so that the save process failed. We have fixed that.

Updated language files

Version 5.5.1

(31.05.2013)

BugFix: DPI values in Save As dialog were not applied in save process

DPI value changes in Save As dialog were not applied in save process. This was a bug. Only the default quality profile values were used. Changes of the DPI values had no effect on PDF file size or image quality.

BugFix: Some fixes regarding periods in file names

Determination of file names from the printer interface had a little bug, because the method behind that feature has removed the file extension, which was the cause for a file name issue. If there where periods in filenames such as my.document.docx then the PDF creation process has used the name my.pdf as save file name. We have overworked related parts of the creator and hopefully we have found all places.

Language file Portuguese updated

Version 5.5.0

(30.05.2013)

Improvement: Optimized image quality in created PDF files

The image quality was sometimes poor in a created PDF files regardless which PDF quality was chosen. The user could sometimes also not influence the image quality with other options. We have improved some parts within the PDF creation process so that the image quality is significantly better and can be better controlled with the PDF quality options.

Improvement: Some minor improvements and fixes

We have improved and fixed some parts of the PDF creator which could cause problems in some cases.

Improvement: Fax option optimized

We have invested a lot of time to optimized the fax option and the fax service which is used to transmit the faxes. We try to make that part as easy as possible.

Some language files updated

Version 5.4.0

(20.03.2013)

Improvement: Added new languages to the installer

The PDF24 Creator itself has several language files which can be used. The installer, on the other hand, had only a few languages which could be used during the installation phase. The new available languages are: Portuguese, Danish, Finnish, Hungarian, Russian, Japanese, Polish, Czech, Dutch, Greek, Hebrew

Improvement: Language file Greek added

Improvement: Ghostscript 9.07 is now installed

All improvement of the new version of Ghostscript are therefore available. The new Ghostscript option -dFastWebView is used by the creator.

Improvement: Opening of folders in the integrated file explorer of the editor optimized

The file explorer of the pdf24 editor now automatically opens the containing folder when the first file is loaded. This is a very cool features because this folder is most of the time the folder to work with so that you can do something in that folder again and again without to open it manually. Especially useful when opening a file via the "Open with" dialog.

Improvement: Saving the last profile in assistant

The selected profile is saved as last used profile when the assistant closes and not only when the pdf save operation was executed. This behavior is the more expected one.

Improvement: Added fontmap creation to the setup

The installer now create the fontmap which Ghostscript uses. The map is created based on the fonts in the windows font folder.

Version 5.3.0

(19.02.2013)

BugFix: TWAIN (Scanner) bugs fixed

Importing from scanner or camera could be very hard because the used driver had some bugs. Some users reported GUI issues and other problems in this part. We have overworked the corresponding part of the PDF24 Creator to provide a more reliable component and we hope that all that issues are now a thing of the past.
Furthermore importing multiple pages at once should now also be possible.

Feature: Loading files by command line when the PDF24 Editor is opened

Only one instance of the PDF24 Editor can be opened at a time. If you tried to load some files by command line when the PDF24 Editor was already opened then nothing happened. This version provides that feature. If the Editor is open and if you want to load files by command line then the files are loaded in the already opened instance.

Improvement: Optimized the installer to fix an PDF creation issue

If you already had an old version installed and if you installed an update or a new version then it could occur that you couldn't create PDF files any longer. The problem was old files, virtualized by the Windows UAC. The installer now detects such a case and installs the PDF24 Creator so that PDF creation is possible.

Version 5.2.0

(12.12.2012)
We recommend to update to the new version because of the fixes described below.

BugFix: Font issue fixed when merging PDF files

Merging PDF files together could cause character problems in the final document. Some text have used the wrong font and therefore some letters could not be displayed correctly. This problem is fixed.

Change: Font settings in PDF output filter removed

The font settings are now controlled fully by the PDF24 Creator to ensure that the final PDF file does not contain font problems.

Improvement: Optimized some internal processing parameters

To optimize the PDF output we have optimized some internal processing parameters. Now the output of some PDF files are better.

BugFix: Not removed temporary files

The Drag & Drop feature of the PDF24 Editor has not removed some temporary files after the application was closed. This bug is fixed.

Language file update for Japanese

New language file Hebrew

Version 5.1.0

(29.11.2012)

Improvement: Optimized the internal preview concerning speed and usability

The internal preview has been accelerated dramatically. Zooming into documents could be very slow in the old version. That was annoying and so we decided to overwork this tool. The new preview is much better in zooming in and out and does not slow down. Furthermore we could improve the usability in zooming in and out using the CTRL key and the mouse wheel. We try to keep the current point of the document in the view so that the document does not jump when you scroll.

BugFix: Fixed another TWAIN issue

We found another weakness in the implementation of the TWAIN import module which sometimes causes problems in some device drivers.

Improvement: Improved PDF output quality again

We could improve the PDF output quality of high quality PDF files again by optimizing some internal parameters of the generator. The predefined PDF quality levels are now more precise so that you will get better graded results. The PDF file size is now directly dependent on the chosen quality level.

Improvement: New language file and updated existing ones

We have updated nearly all language of which we got updates since the last release. The new language file Turkish is now part of the setup. If you also a have new language then you can send us the file to forum@pdf24.org so that we can add the file to the setup.

Version 5.0.0

(16.11.2012)

BugFix: Fixed an Word 2010 related conversion issue

There could be a problem in automatic conversion of Word files with Word 2010. The problem could be solved with a delay in the conversion process.

Feature: Language file for Portugal added

We already had an Portuguese language file, but the old file was targetet for Brasilia. The new file is for the Portuguese. We have renamed the old file in PortugueseBrazilian.

Improvement: Language file updates

We have updated all language files and added some new parts which, partially, still needs to be translated. As soon as we get the missing parts we will add it to the PDF24 Creator.

BugFix: Fixed scanner (TWAIN) issues

There where some problems in some scanner GUI dialogs of the TWAIN interface. Sometimes some elements could not be selected and others closed automatically after it was opened. The new version fixes these issues.

Feature: Load last profile in Save As dialog automatically

Now you save some time when you save a lot files with the same profile. You now do not need to select this profile manually, because the last profile is loaded automatically. If the last loaded profile is the right profile for save then you can click on Continue to proceed.

Improvement: Overriding files improved

Overriding files can be erroneous if the files is opened or locked by the system. The problem was that PDF24 does not have noticed you if file writing fails. We have implemented a new behavior of this. If a file could not be written, then PDF24 tries with a different (very equal) name. If that fails to then you get an error message.

Improvement: Improved image quality in Image To PDF feature

Sometimes the image quality in the PDF file of converted images to PDF was very poor, especially for high quality images. This version brings significant improvements in image conversion process.

Improvement: Improved image quality in saving to PDF process

This process had weak spots in image quality too, even though if a high quality was selected. We have overworked some parts in this process and we could highly increase the quality of the result.

Improvement: Optimized quality of internal preview

So that the user gets a good idea of the result, we have improved the preview in terms of quality. The preview provides sharper and more accurate results.

Feature: Integrated new option when saving to PDF

The JPEG quality was added as an new option to the Save As dialog. You can fine tune the new option to get customized quality results and therefore customized compression rates.

Improvement: Buttons rearranged in PDF24 Assistant

Improvement: Optimized the background in the GUI of the PDF24 Assistant

Removed the default quality part from the settings. Is no longer necessary.

Improvement: Save As dialog optimized to ease the usage.

Improvement: Save as PDF process optimized to control the quality with the parameters a little better.

Improvement: Mail As PDF

Mail As PDF button send the mail with a PDF files by default. The Save As dialog isn't shown by default any longer.

Improvement: Element Customize... added to the profile selection in PDF24 Assistant

Choosing the new element modifies the behavior of some buttons in the GUI. The Save As dialog is used to customize some parameters and the output which is then used as input for the process of the particular button.

Improvement: Load multiple files with the PDF24 Editor on command line

Now you can specify more than one document on the command line of the PDF24 Editor. The PDF24 Editor loads all specified files one after another.

BugFix: PDF file filter issue fixed

Th PDF file filter in the explorer list of the PDF24 Editor now supports uppercase file extensions.

Improvement: Hidden and system files are never displayed in the file list of the PDF24 Editor.

BugFix: Missing file extension when saving a file in PDF24 Assistant

Entering some special file names caused the PDF24 Assistant to remove the file extension from the file name so that the saved file had no extension.

Update mode is not automatic by default

Improvement: Added new Ghostscript version to the setup

We now deliver a new Ghostscript version with the PDF24 setup. The new version brings a lot improvements under the hood of the PDF24 Creator.

Improvement: Optimized internal processing parameters

We could increase the PDF output quality by improving some internal processing parameters.

Improvement: Improved message boxes in PDF24 Assistant

Improvement: Image to PDF tool determines image DPI which is then used in the PDF file

Improvement: PDF/X and PDF/A settings pages in Save As dialog combined with the PDF page

This version combines the PDF/X, PDF/A and PDF pages to one page. Now you can use all options of the PDF page for creating PDF/X and PDF/A files. This could not be realized in an older version. The PDF standard selection element now contains new entries for the PDF/X and PDF/A standards. Selecting one of these activates related form elements.

Feature: PDF/A-1 and PDF/A-2 Standard added

Improvement: A lot of minor improvements in the Save As dialog formular

BugFix: Fixed an issue when using some special characters in PDF informations

BugFix: Fixed a potential time computation problem in update process

Version 4.9.0

(06.09.2012)

BugFix: The PDF24 Editor crashed in the following case

Deleting the last page of a document and dragging and dropping the new last one into a new document crashed the PDF24 Editor. This bug is fixed.

BugFix: Fixed problems in importing from scanner or camera

Importing from scanner, camera or other devices that supports the TWAIN interface was often error-prone. We have overworked some related components and fixed some bugs so that importing should now work better.

Version 4.8.0

(30.07.2012)

BugFix: Fixed a bug in fax tool

If the user double clicks on the fax icon then the fax window pops up and loads a fax with an empty document. This was a bug, introduced in one of the previous versions. Double clicking on the fax icon now opens the fax file load page where the user can choose a file which can then be send as a fax.

Enhancement: Optimized loading of PDF files

Saving merged PDF files could result in errors for special input files. We have optimized the loading process of files so that merging and saving should now work fine for all files.

Enhancement: Extended the send as email feature

We have extended the send as email feature in the PDF24 Assistant and PDF24 Editor. This new feature makes it possible to email not only as a PDF file. All output filters can now be used. This makes it possible to send the file as PDF, as images or any other output format which the PDF24 Creator supports.

Enhancement: Extended the fax tool

Added file type check on fax tool start. The fax tool accepts a PDF file as command line argument which is loaded as a fax. If the user starts the app with no file or with a file which is not a PDF file then the fax tools pen the file choose page where the user has to choose a PDF file which can then be send as a fax.

Language file update of some language files

Version 4.7.0

(12.07.2012)

BugFix: Fixed a special name bug

Sending a document attached to an email directly from the PDF24 Editor changed the name of the corresponding document to a cryptic one. This was a bug which is now fixed.

BugFix: PDF24 Editor window appeared behind other windows

The PDF24 Editor window could appear behind all other windows when you print to the virtual printer and the Editor is set as default target. This problem is fixed.

Enhancement: Font replacement in settings dialog

The font in the settings dialog of the PDF24 Creator has been replaced with a better readable one. Now the dialog looks more modern.

Feature: Close assistant after sending the document via email

There was already an setting to close the assistant automatically when the file was saved. This feature is now also available for the email function of the assistant. You can configure the assistant so that the assistant closes after you have sent the document via email.

Enhancement: PDF password obfuscation

Passwords in Save as Dialog are now obfuscated by "*" characters so nobody can read them. This was a potentially risk in prior versions because the password was visible in the input field.

Enhancement: Save as PDF with digital paper and security enabled

Digital paper and security can now be used together when saving a PDF file.

Feature: Format options and profiles can now be opened via a menu entry

In older version you could only add profiles when you have saved a document via the save as dialog. Now we have added a menu entry in the PDF24 Editor's main menu where you can open the format options and where you can manage your output profiles.

Feature: Refresh option in folder tree of the PDF24 Editor

We have added a refresh option to the explorer tree in the PDF24 Editor so that the user can refresh the tree manually if something have changed what the application do not track automatically.

Enhancement: Password encryption in output profiles

When you specify a password in your profiles, the text was visible in the registry. This was a potential risk. Now passwords are saved encrypted in the profiles which are stored in the windows registry.

Feature: Names of network drives are now displayed

The names of connected network drives where not visible in older versions. Names are important to identify a drive fastly and therefore we have added the names of network drives to the explorer tree of the PDF24 Editor.

Feature: Better cursor when opening a folder

This version now uses better cursors when opening folders in the explorer of the editor. Especially when operating on network drives it could take a little longer to get results. In the waiting time a wait cursor is shown so that the user knows that the application is busy. The application switches back to a normal cursor, after the operation is finished.

Feature: Dropping files to the favourites folder

Dropping files to the favourites folder in the explorer of the editor now creates only shortcuts to the dropped files. No files will be moved or copied any longer. Now the favourites folder is a special folder with shortcuts to often used files.

Enhancement: File icon query improved

The module which is responsible for querying file icons has been improved in many cases. Especially the risk of potential deadlocks has been better taken into account.

BugFix: Fixed an icon bug in the file list of the explorer of the PDF24 Editor

The bug was responsible that in some cases wrong file icons was presented to the user. This part has been overworked and the bug is fixed.

Enhancement: Many core module enhanced

We have overworked many core modules of the software with the result of a better API and many minor improvements and minor fixes.

Enhancement: Shortcut resolution improved

We have improved the explorer inside the editor to handle shortcuts properly. Shortcuts too files and directories are now handled correctly within the file list and the folder tree.

Enhancement: Icon creation of shortcuts improved

Furthermore we have improved the creation of image icons of shortcuts. Shortcuts are resolved and an icon of the linked file is determined.

Enhancement: Improved selection and deselection of documents

We have slightly improved the selection and deselection of documents in the document list of the editor. Now it is more Windows Explorer like selection and deselection which is more intuitive.

Feature: Drag & Drop of documents to move them

Now it is possible to drag & drop documents inside the document list of the editor to move them up and down. This makes working with documents easier.

BugFix: Drag & Drop memory leakage fix

There was a memory leakage in some circumstances when dragging and dropping documents in the PDF24 Editor. The responsible parts have been overworked so that the bug is fixed.

Feature: Drag & Drop documents combined with output filters

We have extended the drag & Drop support of documents in the PDF24 Editor. If you drop documents you can now choose an output filter which is used to create the resulting file which is then dropped to the target. This way you can drop documents to create PDF files, images or any other file format which the output filter accepts. Furthermore you can configure the output filter so that the dropped result is what you need. Additionally you can now drag & drop multiple files at once. This extension is a quite cool new feature which eases working with the PDF24 Editor and which makes dropping of files very powerful.

Enhancement: Error handling when opening PDF files

We have added an error handling when opening PDF files in the PDF24 Editor. If a PDF file can not be opened directly we try to recreate the file and we try to open the recreated one. This often helps to load PDF file with small errors.

Enhancement: Image to PDF quality improved

We have increased the default image quality in image to PDF conversion. Now, images inside PDF files have a better default quality. We have also added customizable config values to the image to PDF tool. This options are currently not available in the settings pages of the application.

Enhancement: PDF processing improved

We have optimized some internal processing parameters to produce better PDF file results.

Version 4.6.0

(22.05.2012)

PDF API improved

This release brings improvements of the PDF API. Improvements affected the reading of PDF files which is now more robust. We have added a reading feature for some PDF files which contains some invalid offsets for special data objects. Furthermore wee have added another feature so that some PDF files with special incorrectnesses can be read. The result is that the PDF24 Creator can open and read more PDF files.

Dutch language file added

Version 4.5.0

(07.05.2012)

Viewer in PDF24 Editor now opens maximized

Double-clicking on a page of a document in the PDF24 Editor opens a viewer of the document. This viewer now opens maximized and no longer in a small window.

Font in Save As dialog replaced with a better readable one

Older versions uses the font Times New Roman in the Save As Dialog UI. This font looks a little outmoded. This font was replaced with Verdana. Now, the options in the Save As Dialog are better readable.

Standard profiles modified

Automatic page rotation is now used in all default profiles. This wasn't the case in older versions. Automatic page rotation were not used in in the good and best profile which was a little confusing. Now the automatic page rotation options are consistent.

Fax Upload improved

A new retry upload feature was added to the fax tool. Sometimes fax file transmission results in an error. A reason can be a bad internet connection. If the transmission results in an error a retry button and an information message is displayed. Clicking on the retry button restarts the fax file transmission.

Saving a file in PDF24 Editor updates the UI element with the new name

Saving a file in PDF24 editor under a new name did not updated the UI name element of that file. This version fixes this issue.

New language file: Serbian

Version 4.4.3

(03.04.2012)

Drag & Drop Bug in PDF24 Editor fixed

The Drag & Drop support in the file list of the file explorer in the PDF24 Editor could cause problems under some circumstances, which can result in a data loss. The bug is fixed. We recommend to update to the new version.

Version 4.4.2

(14.03.2012)

Fixed a critical bug in PDF lib

This bug is one of the reasons why the PDF24 Editor could not open some PDF files. Opening such PDF files crashes the application. This bug is fixed.

Fixed a critical bug when dropping files into the PDF24 Editor

Dropping files from some applications could cause an unresponsive PDF24 Editor. Outlook was one of these applications. This problem ist fixed.

New language file version: Portuguese

Version 4.4.1

(06.03.2012)

Non-translated GUI elements added to language files

New language files version of Danish, Italian, Russian

Some minor bug fixes

Version 4.4.0

(09.02.2012)

Fax printer to send faxes for free

The new version 4.4 also install the new PDF24 FAX printer on all windows versions. The new FAX printer is a very handy new printer which enables you to send faxes very easily.
Printing on the Fax printer opens a small form where you can enter the FAX number of the target device. A preview of the fax is also displayed.
The Faxes are sent through the new PDF24 Fax service, which is located at fax.pdf24.org. To send faxes, a short registration is needed.
Currently the service is completely free, but limited to a few number of faxes each day. After a short beta phase the service will be extended and then you can remove the limits by paying for each fax. Receiving faxes will also be possible by registering and paying for a fax number.

Better names when loading a document into the PDF24 Editor

Names for documents in the PDF24 Editor are now the file names when dropping file to the job list or when opening a file from a file system. This is more intuitive and easier. If a name can not be determined, e.g. if a drag & drop operation does not deliver a name, then a new name is created for that document.

Bug in PDF24 Editor fixed

Importing a single file via File->Import->From filesystem did nothing. Importing multiple files worked without problems. This bug is fixed.

Better names for files when saving as an image

This version uses leading 0 in front of the page number. This improves the sortability of the produced page image files. Old names and sorting was like this: Page1, Page10, Page11, ..., Page20, Page2, Page3, Page4, Page5. This is changed to the new names: Page001, Page002, Page003, ..., Page010, ... Page020. This is better for sorting.

Added support for new keys in page container of a document

The new supported for keys are LEFT, RIGHT, HOME, END. This eases the navigation inside a document.

Support for new keys in document container of the editor added

The new supported keys are UP, DOWN, PAGE_UP, PAGE_DOWN. This eases the navigation inside the document list.

Improved drag & drop of pages in the PDF24 Editor

The support for the new keys introduced some new complexity concerning the drag & drop of pages. The drag & drop components have been overworked to fix all these problems.

Fixed a bug concerning the debug console

The debug console received not every outputs which were produced by the applications. This problem is fixed.

Components of the PDF24 Creator improved

All components now link against the msvcr100.dll and msvcp100.dll, which are part of the setup. This reduces the size of the PDF24 Creator and enables some nice things for the future.

New version of ZLib added

The setup itself now supports new languages: Hungarian, Danish, Finnish

New language file Croatian added and some other language files overworked

Version 4.3.0

(02.02.2012)

Fixed temporary file bugs

We have fixed two temporary file bugs which could result in non-deleted temporary files when deleting jobs in PDF24 Editor.

Automatic file conversion to PDF optimized

Overworked the automatic document conversion part with the result of some small improvements.

Automatic document conversion sequentialized

Conversion of multiple documents is now sequentially and uses less system resources which solves the problem of a wrong document order in most cases. Documents can be sorted, but if the documents have no sortable names then sorting gives no good results.

Printing of multiple documents to PDF24 Editor sequentialized

Printing multiple documents on PDF printer with opened PDF24 Editor is sequentialized too. This solves the ordering problem and uses less resources.

Printing many documents to PDF24 Editor optimized

Printing a lot of documents on PDF printer with opened PDF24 Editor - such as reports from an access database - works better now. We have fixed some bugs which were the reason for lost documents and incorrect ordering. Less system resources are used too.

Language file fixes

Fixed a bug in all languages files: rotate-left and rotate-right keys were reversed

Bugs in Updater fixed and Updater extended

We have added some new parts to the Updater which makes the Update more flexible. Furthermore we have fixed some small bugs which could cause errors.

Language file updates: Lithuanian, Czech, Italian, Spanish

Version 4.2.0

(23.01.2011)

Bug fixes and enhancements in PDF core components

Opening and saving PDF files in PDF24 Editor could generate an erroneous PDF file which could not be opened by a PDF reader. This was a minor bug because the problem only occurred on some special PDF files. Furthermore we have enhanced some PDF components so that the PDF24 Editor can open more PDF files.

Bug concerning users personal folder fixed

The PDF24 Creator could not start if the users personal folder was not reachable. One cause why this folder can not be reached is that the folder is stored on a network drive and the network is not available. We have fixed this bug. Now the PDF24 Creator also runs if this folder is not available.

Added support for right shift key in PF24 Editor

Some user work with the right shift key to select something. Before this release the PDF24 only supported the left shift key to select pages in the PDF24 Editor. This version introduces the support for the right shift key.

Instalação da driver da impressora foi melhorada.

The component which installs the PDF printer driver contained some minor bugs which could be the cause why a PDF printer driver could not be installed. We have overworked this part and now PDF printer driver installation should work better.

Romanian language file updated

Version 4.1.2

(16.12.2011)

Text elements from PDF24 setup added to PDF24 Creator language files

The setup also contains some text elements which are to be translated by translators. This elements are now part of the PDF24 Creator language files so that the translators can translate these elements.

Bug BugFix: 2 minor GUI problems fixed

Italian texts added to PDF24 setup

New version of the language file Lithuanian added

Version 4.1.1

(15.12.2011)

Bug BugFix: Version number bug fixed

The version number was not correctly compiled in so that the version number could not be displayed correctly in PDF24 GUI. Instead of the version number a c cryptic text was shown. The version number is highly important for the update process. Without a correct version number no updates will be found. This bug is fixed.

Version 4.1.0

(14.12.2011)

Bug BugFix: Default Printer Bug fixed

The recently published version 4.0.0 contains a bug which prevents a component to make the PDF24 PDF printer temporarily to the default one. This is bad because this caused that some documents could not be converted to PDF and nice drag & drop conversion in editor is not working. We have overworked this part of the application and now everything should work fine.

Component based setup introduced

Version 4.1 introduces a new component based setup by which single components of the PDF24 Creator can be selected or deselected. Currently there is only a single component but in the near future we will add some more optional components which than can be checked or unchecked during setup phase.

This new feature is also helpful for system administrators. Admins can select or deselect some components via the command line. A list of all supported command line arguments of the PDF24 Creator setup is located here: PDF24 Creator Setup Parameter

Language file Hungarian added

Added more meta information to language files

Meta information are helpful for translators. We have added the encoding information because PDF24 Creator language files should be encoded in UFT-8 with BOM.

New version of the language file Italian added

Version 4.0.0

(09.12.2011)

Added debug console to several parts of PDF24 by pressing F12

This new feature makes a debug console visible to the user into which debug outputs are shown. This outputs helps in some circumstances to find errors. If you have problems with PDF Creator you can open the console and you can email the outputs to us so that we can look at it to find problems.

Bug BugFix: PDF creation problem when Ghostscript was installed before

If another version of Ghostscript was installed in your system PDF24 had problem to work correctly if the version installed by PDF24 and the other version was different. PDF creating failed in this case. This was bad because Ghostscript is installed on many computers and all those people could not use the PDF24 Creator. We have searched the problem and we have found and fixed it in this version.

Bug BugFix: Wrong state of Save All icon in PDF24 Editor toolbar

The save all icon in the PDF24 Editors documents toolbar was selectable in some cases if no document was visible. This was a wrong state. We have corrected that so that the button is only usable if documents are available.

Bug BugFix: Fixed some PDF profile inconsistencies in several modules

There were some PDF profile inconsistencies in exchanging data between several PDF24 Creator modules. In most cases users shouldn't have noticed anything. We have fixed this problem in version 4.0.

Version 3.9.0

(05.12.2011)

Slovak and Finnish translation added

Misspellings in English language file removed

Drag & Drop bug fixed

Fixed a bug when dragging a document in PDF24 Editor to Windows Explorer. Dropping failed in prior versions.

Remember last used profile in assistant and auto select last used profile after printing on PDF printer

Version 3.8.0

(03.11.2011)

New feature: Blank pages can be added to documents

This feature is provided by the PDF24 Editor and is located in context menu of pages. Just right click on a page of a document and you will see two options to add blank pages. Blank pages can be inserted before or after a page. The inserted blank page has the same dimension as the page before or after which the blank page was inserted.

Bug BugFix: Fixed a bug in PDF library

With this bug fix the PDF24 Creator now can open more PDF files. Some special PDF files could cause problems. There are still some PDF files which can't be opened by the PDF24 Editor. If a PDF file can't be opened there is a trick to open the file. Just print the file on the PDF24 PDF printer to create a new PDF file based on the old one. The new file should work fine. That's possible because real PDF readers often can still open these files.

Added /NOUPDATE flag to setup

Use this flag when installing the PDF Creator to disable update checking and installation. This flag is useful for companies which wants too use the PDF24 Creator on their clients. Use this flag and you can disable updates which are often the preferred update mode.

Changed button name Save in format options dialog to Continue...

The new name is often better than the old one because the user has to do some more things after clicking on the save button. The Continue... button is better if some more steps follows.

Romanian and Bulgarian language files added

The PDF24 Creator is available in 16 different languages. To make the PDF24 available to more people we need more language files. If you have translated one language files to a language which is not available in PDF24 Creator setup then send us your file and we will add it to the PDF24 setup. Many people would be very thankful.

All language files overworked

We have overworked all language files and added missing parts. Not translated parts are marked with a #! marker. All these lines needs to be translated by translators. Please translate these parts and send us your files.

Improved data removement if not used any more

The PDF24 Editor had stored not used data longer than required. We have fixed this. Not used data is freed as soon as possible.

Slightly improved drag & drop support in editors document list

Invert selection feature added to page extract dialog

We have added a context menu to the page container in the page extract dialog. This context menu contains a invert selection entry which inverts the current selection of pages. This new feature is useful if extracting pages of large documents.

Mouse wheel feature added to page container in page extract dialog

Now you can use the mouse wheel to scroll up and down in the page container of the page extract dialog. Very useful when using large PDF files.

Version 3.7.0

(11.10.2011)

Drag & Drop Support enhanced in PDF24 Editor

We have worked hard on PDF24 Editor to increase the usability. The focus was on Drag & Drop support.

Drag & Drop Operations which are currently supported:
  • Drag & Drop of files and directories in the explorer list to Windows Explorer, to the explorer tree and to the job list
  • Drag & Drop of directories from the explorer tree to Windows Explorer and to the explorer list
  • Drag & Drop of jobs in job list to Windows Explorer, to the explorer tree and to the explorer list
  • Drag & Drop of pages of a job into other jobs and into the same job to a new position

New language file Swedish added

Some language files overworked

Version 3.6.0

(27.09.2011)

Selection of multiple files in import dialog of PDF24 Editor

The import dialog in File->Import->From file system now supports selection of multiple files at once. Prior this version only one file after another could be imported.

Multi-page TIFF support in Drag & Drop import in PDF24 Editor added

In previous version only the first page of a multi-paged TIFF file was imported into the PDF24 Editor. Now all pages become imported into a single document.

Bug BugFix: Uppercase/lowercase bug in email function of PDF24 Assistant fixed

After PDF file creation the assistant opens which has a sent via email button. After clicking this button the user has to enter a PDF file name which us used as the filename for the email with the attached PDF file. The problem was that the entered name was converted to lowercase letters regardless whether the user had entered uppercase letters. This problem ist fixed.

Image to PDF A4 paper size optimization added

In image to PDF conversion process the paper size of the final PDF files was computed with a fixed DPI values and the image size. The conversion of large images results in large PDF file paper sizes. This is a little problem especially when merging PDF files. The PDF file with the images could be very large and the displaying of the merged file was bad in such circumstances. Now we optimize the paper size to A4 format. The paper size of PDF files from large images will always be not greater than the A4 format. The paper size of small images remains as in previous versions of the software. In future versions we have planned to add an option to preferences to make this configurable.

New Drag & Drop support added to PDF24 editor

Not it is possible to save document from the PDF24 Editors document list via Drag & Drop. Just drag & drop a file to a target and the PDF file is saved automatically and transferred to the target. We have planned to add more drag & drop support to the editor.

Version 3.5.3

(07.09.2011)

Update of language files and one new language file added

Language files which has been renewed are Japanese, Italian, Lithuanian and Czech. The new language file is the Danish one.

Version 3.5.2

(05.08.2011)

Bug BugFix: Bug in profiles fixed

There was a bug in creating and selecting profiles. If you had added and then selected a profile without selecting a signature the PDF24 crashed. This bug is fixed. Profiles should work without signatures now.

Version 3.5.1

(05.08.2011)

Bug BugFix: Watermark could not be underlayed

The watermark could not be printed under the content of the file. It always was printed above the content regardless what option the user had checked. This problem is fixed in this version.

There is a new language file for Lithuanian.

Version 3.5.0

(03.08.2011)

Bug BugFix: Quality loss in PDF file composing and merging

In composing and merging process could be a noticeable quality loss in PDF file with images. The reason was some incorrect settings. This problem is fixed.

Options for image resolution in PDF files added

Image resolution options are now part of the save as dialog in PDF pages. You can enter your preferred image resolution. This is useful if you want to fine-tune the PDF quality and therefore the PDF file size. Lower resolutions results in a smaller PDF file.

Version 3.4.0

(01.08.2011)

Feature Digital Paper added

This new feature gives you the possibility to combine the content of a PDF file with the content of a digital paper. The content of the digital paper is displayed under the content of the PDF file. This has the same effect as if you had printed the PDF file on a normal printer with special paper. The digital paper can contain more than one page. The last page of the digital paper can be repeated and underlayed to the other pages of the PDF file.

Some minor non critical bugs fixed

Language files overworked and extended

The language files has been updated. A lot of new text are translated. Thanks to the translators. The current PDF24 Creator contains some new text elements which needs to be translated.

Version 3.3.0

(07.07.2011)

Watermark/Stamp Feature added

Esta nova funcionalidade torna possível adicionar uma marca de água a um ficheiro em PDF. A nova funcionalidade está localizada no diálogo “Salvar Como”. Clique no botão “Salvar Como” no assistente e irá ver a nova entrada de menu. Há muitas opções para configurar a marca de água. Pode configurar o texto, a fonte, o tamanho da fonte, o ângulo, a cor, o modo e as margens. Todas as opções podem ser gravadas num perfil. Esta nova característica pode ser usada também como um carimbo. Escolha o modo de sobreposição e o texto será impresso por cima do conteúdo da página.

Some bugs fixed

PDF/A OutputConditionIdentifier Bug fixed. The OutputConditionIdentifier couldn't be set. PDF/X and PDF/A Bug fixed. There could be problems in creation of these types. Weboptimize bug fixed. The Weboptimize feature could not be used.

Version 3.2.0

(27.06.2011)

Signature feature in Save As dialog integrated

This change provides the signature feature also in assistant. You don't need to open the editor to add a signature to a PDF file. You can also use the signature with profiles. Make your settings in Save As dialog, save all into a new profile and than you can use the new profile instead of making all settings again. The eases signing PDF files. Currently there is a limitation web optimize feature. Signature and web optimization can't be used together.

Old signature process removed from editor

The old PDF signature process has been removed from PDF editor because the old variant is not needed any longer. In the last version we have change the editor which uses the Save as dialog. This dialog now contains the PDF signature feature. Therefore the old dialogs are redundant.

PDF security bug fixed

Security settings in PDF preference pages contained a bug. PDF permissions have not been set correctly into the PDF so that permissions were wrong. We have removed the bug and now PDF permissions should work correctly.

Translations notes added to language files

The head of each language file contains a block with note for translators. Please read the notes if you plan to translate a language file.

Language files overworked and new language file Vietnamese added

We have updated all language files and marked missed texts with the #! marker. We have received a new Spanish language file with a lot of corrections. Furthermore we have added the new language file Vietnamese which we have received from a user.

Version 3.1.0

(16.06.2011)

Rotation problem fixed

For some documents, the rotation function did not work correctly although the pages were shown at the right angle. It could be that that the rotation was changed after saving a document. This problem is fixed. The rotation should now work correctly. Please note the automatic page rotation feature in saving dialog. If this property is marked in this dialog, the rotation can be changed during saving. The automatic rotation depends on the text in the document and is set accordingly for each page.

Properties dialog of a document removed from PDF editor

The properties dialog of a document which was accessible via the context menu has been removed. This has become redundant. All properties of a document can now be set when saving. There is also a new dialog as it already exists in the assistant in the save as function. The use of profiles is possible in this new dialog which speeds up working.

Properties dialog added in editor save, sign, and mail function

The new properties dialog to set properties of an output format was also added to the sign and mail function so that you can also set your desired properties prior.

Sorting of files in Explorer

All people who have already missed the feature have it now. Files are now sorted in Explorer.

PDF quality bug fixed

In some situations the PDF quality was not set properly. We have fixed this problem.

New language file Czech added

If you have already translated the PDF24 into another language, then send us your translation and we add it to the PDF24 Creator setup.

Version 3.0.0

(28.04.2011)

Rotation of pages of documents in PDF Editor

There is the possibility to rotate pages of documents. The new feature can be found in context menu and the main toolbar. You can rotate single pages, all pages or selected ones.

Sorting of documents in PDF Editor

Now you can sort opened documents in PDF Editor. The new feature can be used via toolbar. The sorting function always uses the document name and can sort in ascending or descending order. The new feature is very useful when editing many documents like many images which are to be merged to one PDF.

Main menu in editor overworked

The main menu in editor has been re-structed and extended by some new elements.

PDF Editor Start/Close delay fixed

If there where remote devices connected to a PC which where temporarily not available then the PDF24 Editor started and closed very slowly. The problem was the request of information of the remote drives which ends in a timeout. This problem is fixed.

All language files overworked and updated

The structure of all language files has been checked and missed elements has been added. Some parts of some language files are not translated. These texts are marked with the letters #! at the beginning. Translators, please translate not translated texts and check the language files.

Bug fixed in assistant when saving a PDF by using a user profile

There could be problems in saving a PDF file using a user profile. The PDF file could be broken.

Version 2.9.9

(18.04.2011)

Bug with file name determination fixed

There was a bug in file name determination process when printing a file via PDF24 PDF printer. If a file name contains more than one dot the name could be truncated to much. Normally only the file extension should be truncated. This bug is fixed in this version.

Version 2.9.8

(18.04.2011)

Case sensitivity bug in save as dialog in PDF editor fixed

There was a bug with case sensitivity in save as dialog in editor. If the user entered a file name with capital letters these letters becamed converted to lowercase letters and the PDF file was saved under the filename with the lowercase letters. This was a bug which is fixed now.

Version 2.9.7

(08.04.2011)

Bug while creating large files fixed

The creation of large files was not possible because of a bug. The progress bar in PDF creation process showed 100% but the process doesn't finnished. We have fixed this bug. Large files can now be created as well as small ones. Users are recommended to update to this version.

Version 2.9.6

(08.04.2011)

Default PDF Profile Bug fixed

In PDF24 Creator settings a default PDF profile can be configured. This configured profile was not used as default profile in assistant and PDF editor. This bug has been fixed. If a PDF has been created the assistant and the editor now uses the default profile as the selected one. The user can change the profile for each PDF file separately.

Bottom bar in PDF Editor GUI removed

The bottom bar did nothing special. We have classified the bar as unnecessary. The bar has been removed. The application has now more room for the explorer and the files. This helps to increase the usability.

PDF Editor split view enhanced

The split view has been enhanced. The ration between explorer and files is now 40 to 60.

Drive names in explorer inserted

The drives in explorer were displayed as drive letter (C: D:) only. Now there also the drive name if there is any.

Bug in file explorer fixed

A bug in file explorer could cause that some directories could not be opened. This bug is fixed.

Last opened directory in file explorer is saved

The PDF24 Editor saves the last opened directory in file explorer so that this directory will be opened the next time the editor starts. Previous versions always opened the favorite directory.

Version 2.9.5

(06.04.2011)

Bug in Save dialog of Editor fixed

If images or other documents were converted to PDF then there could be a problem while choosing a filename to save the PDF. If known file extensions are hidden in Windows the user had no chance to choose the correct .pdf file extension with the result that the saved file had an incorrect extension and was not recongnised as PDF in Windows Explorer. We have fixed this bug.

Version 2.9.4

(06.04.2011)

Bug in Save As dialog fixed

Because of a bug several settings in save as dialog were not applied to the saved PDF. It was not possible for example to set security settings of a PDF. We have fixed the bug which has slipped in in one of the earlier versions.

Version 2.9.3

(06.04.2011)

Some Bugs in PDF API fixed

The Screen Capture feature and the conversion of images to PDF was broken. There were some bugs in the PDF API which we have fixed in this version. Screen Capture and Image to PDF conversion now works.

Updated Italian language files added

Version 2.9.2

(31.03.2011)

Bugs in PDF API fixed

We have fixed some bugs in PDF API. Some special formatted PDF could cause problems while reading the PDF. There was another bug with encrypted PDF files. Normally encrypted PDF cannot be opened in PDF24 Editor but it was possible in version 2.9.1 which results in errors. Version 2.9.2 blocks encrypted PDF. If you want to open the encrypted PDF just create a new non encrypted file by printing them on the PDF24 PDF printer. This creates a new PDF file which is not encrypted.

Foreground/Background bug in PDF editor fixed

If the PDF24 Editor was open and overlayed by other windows and if you printed a document on PDF printer so that the editor loads it the application windows stayed in background and became not a foreground window. There was no possibility to bring the window to front. We have fixed this bug. Not the windows automatically becomes a foreground windows if a new files is available.

Option to create multi-page TIFF files added

There was no option to create multi-page TIFF files in save as dialog. If a file had more than one page every page was saved in a separate TIFF file. A TIFF file can be multi-page. We have added this option. If selected a multi-page TIFF file will be created.

Chinese language file added

Versão 2.9.1

(01.02.2011)

Bugs corrigidos.

Corrigimos alguns pequenos bugs e voltámos para uma versão de Ghostscript anterior. Introduzimos o Ghostscript 9.0 no PDF24 Creator mas esta versão de Ghostscript parece ser instável. Por causa disso, implementámos no PDF24 Creator 2.9.1.uma versão mais antiga do Ghostscript.

Preparação para as apps de serviço.

Nós introduzimos um interface através do qual é possível integrar aplicações de outras apps de serviço. Este novo interface serve para efeitos futuros. O serviço de impressão PDF, utiliza já o novo interface.

Tamanho reduzido de instalação

Nós reduzimos o tamanho da instalação em cerca de 3 MB.

Versão 2.9.0

(24.12.2010)

Funcionalidade: Suporte para PDF/X e PDF/A.

Foi integrado o suporte para criar ficheiros PDF/X e PDF/A. Estes dois novos formatos de ficheiro podem ser criados usando Guardar como diálogo. Cada um destes tipos tem as suas próprias propriedades que podem ser configuradas no diálogo.

Funcionalidade: Utilizador múltiplas páginas no editor.

Nas versões anteriores do editor PDF24 só poderia utilizador uma página após a outra. Não havia possibilidade de escolher mais que uma página de cada vez. Isto não era um problema para documentos com poucas páginas, mas se o documento é grande e você quisesse utilizador um intervalo de páginas, então teria que utilizador manualmente cada página usando a tecla CTRL e o botão esquerdo do rato. Mas nós melhorámos isso. Agora você pode utilizador um intervalo de páginas usando a tecla LSHIFT e o botão esquerdo do rato. O comportamento é semelhante à selecção de ficheiros do Windows Explorer. Para escolher um intervalo, faça o seguinte: Seleccione a primeira página com o botão esquerdo do rato e clique na última página, mantendo pressionada a tecla LSHIFT. Se a tecla CTRL é igualmente pressionada, então este intervalo será adicionado às páginas escolhidas, caso contrário, todas as outras páginas serão desmarcadas.

Funcionalidade: Perfis de saída PDF utilizáveis directamente no assistente.

Em Guardar como diálogo, você pode adicionar perfis para o formato de saída para pré-configurar uma saída. Se você definir um perfil para o tipo de ficheiro PDF, este perfil é então utilizado na lista de perfis do assistente. Este fluxo de trabalho é menor do que guardar para PDF usando o diálogo Guardar Como.

Funcionalidade: Fechar automaticamente o assistente após guardar o ficheiro.

Existe uma nova opção em configurações que você pode configurar o comportamento de encerramento do assistente. Ao activar a opção de fechar depois de salvar, o assistente será fechado automaticamente após um ficheiro ser guardado.

Improvement: Better font for input fields in user interfaces

Existiam algumas fontes incorrectas em alguns campos de entrada que não eram compatíveis com o resto do interface do utilizador. Temos melhorado algumas peças do núcle o do nosso motor de renderização para melhorar esta situação.

Improvement: Profile intention for profiles in save as dialog added

Um perfil no diálogo Guardar como, contém agora uma opção para o tipo de ficheiro de saída que um perfil foi feito. Um botão de perfil abre agora a página do tipo de ficheiro de saída para o qual o perfil se destina. Esta propriedade também é usada no assistente para recolher todos os perfis PDF e disponibilizá-los na caixa de selecção do perfil.

Bug BugFix: Bug in conversion util fixed.

Pode haver resultados imprevisíveis na ferramenta de conversão ao ser usado com múltplos ficheiros ao mesmo tempo. Esta versão contém uma solução para esse problema. Agora você pode usar a ferramenta de conversão de múltiplos ficheiros sem qualque problema. A ferramenta de conversão é usada no editor para converter automaticamente documentos para PDF, arrastando os ficheiros para a área apropriada no editor.

Bug BugFix: Solved problem in signature util when signing documents with only one page.

Documentos com apenas uma página não podiam ser assinado por causa de um bug num algoritmo. O editor falhava ao fazer isso. Nós corrigimos o erro.

Bug BugFix: Optimize for web an security option in PDF properties can not be used together in all circumstances

Um PDF não pôde ser guardado quando as opções optimizar para web e de segurança foram activadas com palavra-passe do utilizador. Esta versão contém uma solução para este problema. Se a segurança com a palavra-passe do utilizador estiver activa, um ficheiro PDF não será optimizado para a web. Vamos melhorar esse comportamento em versões futuras.

Versão 2.8.8

(18.11.2010)

Melhoria do programa de actualização.

Temos melhorado e modificado algumas partes da actualização do PDF24 Creator. O actualizador novo contém um modo mais fléxivel de pedir uma nova actualização. Com esta mudança, nós estamos a preparar-nos para o futuro e a aumentar o número de pedidos de actualização.

Versão 2.8.7

(16.11.2010)

Nova instalação da driver da impressora.

O foco desta versão foi optimizar a instalação da driver da impressora PDF. Nós introduzimos um mecanismo de nova instalação, que tem algumas vantagens em relação à variante antiga. São elas:
  • Esta variante trabalha com todas as versões do Windows em que o PDF24 Creatorpode ser instalado. Estas são o Windows XP, Windows Vista, Windows 7 e as versões do servidor correspondente.
  • Nenhuma Mensagem de Teste com Logo Windows acerca de driver não atribuída.
  • A instalação pode ser executada sem interacção do utilizador. Existem dois modos que podem ser utilizados. Use o argumento de linha de comando /SILENT instalar sem interação, mas com progresso ou uso visíveis /Verysilent Instalar sem interação e com progresso invisível. Isto simplifica a implantação do PDF24 Creator na sua intranet.

PDF lib melhorado.

Nós corrigimos dois bugs na nossa PDF library que causou problemas na leitura e escrita de ficheiros PDF especiais. Nós também adicionámos algumas novas partes na lib para criar novas funcionalidades para futuras versões do PDF24 Creator.

Integração do Ghostscript melhorada.

Já não são mais necessárias chaves de registro para o Ghostscript. Mudámos para variáveis de ambiente que também são podem executar Ghostscript. Esta é uma vantagem-chave pois um utilizador pode instalar outras versões do Ghostscript e o PDF24 Creator não será afectado por isso.

Bug no filtro de saída BMP fixo.

O modo de 3-bits do filtro de saída BMP foi removido. Este modo não é possível.

Imagens de configuração modificadas.

A configuração agora contém imagens com ovelhas. As imagens são melhores do que os antigos. Durante toda a gente que a instalação possa ver as imagens com as ovelhas, que faz uma boa impressão às pessoas que instala o software.

Versão 2.8.6

(13.10.2010)

Novo GUI no Assistente PDF24.

O novo GUI no Assistente de PDF24 exibe melhor os elementos do que o antigo. A formatação dos elementos agora deve estar ok com todos os idiomas. O GUI antigo tinha problemas de formatação usando linguagens com elementos de texto maiores. Além disso, haviam problemas nas versões mais antigas da impressora PDF PDF24 quando usadas em ambientes Windows com configurações de DPI diferentes do padrão de 96 DPI.

Ocultar unidades no explorador do editor PDF24.

O explorador do editor PDF24 agora usa a configuração do Windows Explorer, que está localizada no registro no caminho HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer\NoDrives, para ocultar drives. Administradores de sistemas da Citrix agora pode usar isto para esconder movimentações que alguns utilizadores não devem ver.

Configurações - Carregar PDF no editor se ele estiver aberto – adicionado.

With this option you can control whether printed PDF documents are to be loaded in editor if the editor is open or not. By default PDF documents will be loaded in assistant and if the editor is open it will be loaded in it. User who don't want this behavior can change this with this new option.

Retire algumas seqüências dos nomes de ficheiro determinados no processo de impressão PDF.

As definições contêm uma nova área na qual um utilizador pode adicionar algumas seqüências que devem ser removidas automaticamente dos nomes de ficheiros determinados no processo de impressão PDF. Algumas aplicações adicionam prefixos para nomes de ficheiros indesejáveis. Esta nova área dá-lhe a possibilidade de remover isto automaticamente. Existem sequências pré-configuradas para alguns programas da Microsoft como o Word.

Removida cintilação no GUI do editor PDF24.

Havia uma cintilição irritante na lista dos documentos PDF carregados quando você clicava num documento. Esta cintilação foi agora removida.

Renderização melhorada de alguns GUIs.

Os GUIs que são renderizados pelo nosso pequeno motor de renderização HTML, são agora processados mais rapidamente. Alguns GUIs parecem melhor agora com reduzida ou sem cintilação.

Problemas resolvidos no modo de pré-visualização do explorador do editor PDF24.

O modo de visualização do Explorer do editor PDF24 foi optimizado de forma que todos os elementos de visualização deve ser exibida como deveria ser. Em versões mais antigas, pode ser que alguns elementos de visualização não sejam exibidos correctamente.

Rotação dos modos de pré-visualização de documentos PDF carregados na lista de documentos do editor PDF24 usando CTRL + roda do rato.

PDF documents in PDF24 Editor can be displayed is some preview modes which can be changed by menu entries. Now you can also change or rotate the display mode of all documents in the document list by hold down the CTRL key and using the mouse wheel.

Adicionado ficheiro da língua Portuguesa.

O PDF24 Creator agora contém um ficheiro do idioma Português. Isto é para todos os utilizadores Portugueses, que agora podem escolher o ficheiro para localizar o PDF24 Creator para Português.

Adicionadas opções adicionais PDF no diálogo Salvar como.

Clicando no botão Guardar como no PDF24 Assistant abre uma janela na qual um utilizador pode seleccionar e configurar um filtro de saída. A saída PDF filtro contém agora mais opções para personalizar a saída do PDF. Agora você pode configurar o padrão PDF, rotação da página, a resolução, o modelo de cor, método de compressão de imagens e também fontes.

Versão 2.8.5

(23.08.2010)

Instalação de driver de impressora PDF melhorada para Windows XP.

Windows 7 and Windows Vista user could already use the enhanced PDF printer driver. Now this driver is is usable under Windows XP too. The new PDF printer driver is tuned for PDF creation. The driver supports a lot of new paper formats and does not contain a real limitation in paper size. The paper sizes A0, A1, A2 can now be used in addition to the old paper formats. Forthermore there is a option to customize the paper size.

Some minor bug fixes removed

This version is mainly a bug fix version which removes some minor bugs which we have found in the past. Forthermore we have enhanced some core parts of the software to be able to integrate new feature in the future.

Versão 2.8.4

(21.06.2010)

Adcionados ficheiros da língua Espanhola e Japonesa.

O PDF Creator agora contém os ficheiros de língua Espanhola e Japonesa.

O instalador contém mais ficheiros de idiomas.

O instalador contém agora também ficheiros de mais idiomas. O instalador antigo tinha activado apenas os ficheiros de Inglês e Alemão. Agora existem ficheiros em Alemão, Inglês, Francês, Italiano, Russo e Espanhol.

Versão 2.8.3

(14.06.2010)

ficheiro de língua francesa acrescentado e ficheiro de idioma italiano melhorou

Temos um ficheiro de língua Francesa e um melhorado de Italiano. Os novos ficheiros são fornecidos na versão 2.8.3.

Selecção automática de idioma melhorada.

Melhorámos a selecção automática de idioma. Ficheiros de idiomas devem ter um nome especial para que a selecção automática de linguagem seja capaz de encontrar os ficheiros . Se um ficheiro de idioma não é nomeado com um nome correcto, a selecção de idioma automática não reconhece o ficheiro mas o ficheiro pode ser escolhido manualmente nas páginas de preferência. Ficheiros de idioma anteriores à versão 2.8.3 só podem ser nomeados com nomes em Inglês, mas agora os ficheiros também podem ter o nome no seu local apropriado, por exemplo, o ficheiro de idioma italiano pode ser nomeado ou Italian.lang Italiano.lang.

Versão 2.8.2

(09.06.2010)

Resolvido problema do atalho das drives de redes mapeadas.

Se uma pasta contém pelo menos um atalho para uma unidade de rede mapeada e a unidade não está ou não pode ser ligada, o utilizador tinha que se preocupar com os atrasos causados pela auto-resolução do atalho. O problema está resolvido. Não há mais tempo de espera. A espera só poderá ocorrer se você der um duplo clique no atalho da pasta de rede e a unidade de rede não estiver conectada.

Problema resolvido com a partilha da impressora pdf24 numa rede com base num domínio.

Se a impressora PDF24 de um PC pertencente a um domínio estiver a ser partilhada e conectada a outro pc desse domínio, então os trabalhos a imprimir não eram redirecionados para a conta de utilizador correcta. Melhorámos a impressora PDF e agora você pode usar e compartilhar impressoras entre computadores PDF num domínio.

problema de espaço reservado ao mudar o idioma resolvido

If you change the language of the PDF Creator without restarting the software after the change, then you could see placeholders in some places. After a restart of the pdf printer placeholders are replaced correctly. This small imperfection is solved.

Adicionado ficheiro de idioma Russo.

O PDF24 Creator agora contém os ficheiros de idiomas Alemão, Inglês, Italiano e Russo. Você pode adicionar outros idiomas por copiar e editar um ficheiro de linguagem existentes. Uma instrução de pequeno porte é localizado em nosso fórum.

O ícone da bandeja já pode ser desactivado em páginas de preferência

O ícone da bandeja podem ser activados ou desactivados em páginas de preferência. O ícone na bandeja contém o recurso de captura de ecrãlegal que não pode ser usado se você desactivar o ícone da bandeja. Alguns utilizadores não precisam desse recurso ou ficar irritado do ícone da bandeja adicional, esta utilizadores agora podem desactivar o ícone.

Melhor coloração do botão no assistente.

Agora, os botões de melhor ajuste para o fundo. As bordas são mais suaves.

Selecção de idioma melhorada.

Se nenhum idioma foi configurado para um utilizador da língua será determinado a partir da linguagem do sistema. A determinação automática de linguagem foi optimizada. Agora, o idioma da direita deve ser determinado correctamente se o ficheiro de linguagem necessário estiver disponível.

Outras mudanças.

Melhorámos a instalação e alguns componentes do PDF24 Creator.

Versão 2.8.1

(11.03.2010)

Problema resolvido com a confirmação de leitura usando a função de e-mail.

Usando os botões de enviar ficheiros PDF criado por e-mail tinha activado por padrão ler confirmação. Isso foi alterado na versão 2.8.1. Por padrão ler confirmação é desactivado. Você tem que habilitar essa opção manualmente, se você quiser ler aa confirmação.

Versão 2.8.0

(09.03.2010)

Preview de assistente integrado

O assistente contém um preview agora o que lhe dá uma visão rápida do ficheiro pdf criado. As cargas de preview rápido e tem as funcionalidades básicas para o resumo do documento. Com base na previsão você pode ver se todas as páginas foram criadas correctamente.

Filename pedido assistente integrado ao usar e-mail recurso

Ao usar a função InputBox um e-mail é o primeiro a solicitar um nome para o ficheiro que será anexado ao e-mail. Em versões mais antigas não houve pedido de nome com a consequência de que os ficheiros podem ter nomes criptografados em um e-mail. Não havia nenhuma possibilidade de mudar o nome. Às vezes, o nome foi ok, porque PDF24 chapéu Criador um método para solicitar o nome das janelas monitor impressora, mas um nome nem sempre é dada. Agora você pode inserir um nome bom.

Nomes de documentos em editor pode ser mudado agora

Você pode alterar o nome de um documento no editor através do menu de contexto. O menu de contexto contém uma entrada para iniciar a mudança de um nome. Em versões mais alterações foram feitas nome ao salvar um documento. Útil é esse recurso quando enviar um documento via e-mail. O nome de um ficheiro anexado a um e-mail é o nome de um documento no editor. O novo recurso dá-lhe a possibilidade de se alterar o nome e, portanto, para introduzir um nome bom para ficheiros em e-mails.

Removido bug na funcionalidade de e-mail

Ao enviar um ficheiro criado por e-mail o programa de e-mail padrão é usada. Não poderia ser um problema de foco quando abrir esse programa de e-mail padrão. Esse problema foco foi removido.

bug removido quando o compartilhamento da impressora PDF em uma rede

A impressora pode ser compartilhado em uma rede. Isto pode ser feito com a impressora PDF PDF24 também, mas houve um erro durante a impressão nesta impressora partilhada a partir de um PC que usa essa impressora compartilhada. A mensagem "Não foi possível abrir pipe user" apareceu nesta situação. Esse problema foi removida. Agora você pode compartilhar uma impressora PDF em uma rede e usá-lo em outro PC na rede. Um exemplo típico é uma aplicação cliente / servidor. Se você tem um servidor no qual está executando um programa que é usado por clientes, você pode compartilhar o cliente PDF impressoras e instalá-los no servidor para que os clientes podem imprimir em suas impressoras PDF para obter algumas impressões do aplicactivo no servidor .

Mais rápido visualizador de editor

O espectador tem sido reforçada. O telespectador é mais rápido e piscando irritante foi removido.

Versão 2.7.0

(19.02.2010)

Adicionados formatos de saída alternativos.

O PDF24 Creator2.7.0 fornece uma maneira de salvar documentos, não apenas como PDF. Um monte de filtros de saída foram adicionados para que você possa salvar documentos como os seguintes formatos: PDF, PS, EPS, PCL, PNG, JPEG, BMP, PCX, TIFF, PSD. A maioria dos filtros de saída de novos formatos de ficheiro de imagem. Para o momento, estes filtros de saída de novo só estão disponíveis em PDF24 Assistant. Um novo botão chamado "Save as" foram adicionadas ao assistente para abrir uma formular e escolher um formato de saída. Cada um destes formatos de saída de saída têm propriedades próprias, que podem ser alteradas para personalizar a saída. Além disso, todas as propriedades podem ser salvas em perfis para reduzir o tempo para alterar as propriedades e, portanto, criar um ficheiro.

Visualização de processos de assistente

Processes are visualized now. If the assistant saves or converts a document a small process windows is shwon so that the user can see that something happens. This is helpful even when operating with large files.

componentes do núcle o PDF prorrogado

Componentes do núcle o PDF foram extented para que o Editor PDF24 deve ler mais ficheiros PDF. A maioria dos ficheiros PDF já podia ser lido antes, mas agora o software pode ler mais alguns documentos.

PDF Screen Capture prorrogado

A opção de captura de novos beed acrescentou. PDF24 Creator agora suporta o Windows Clipboard. Logo que uma imagem está disponível na área de transferência a opção apropriada pode ser seleccionada para gerar um PDF desse conteúdo. Para copiar a ecrãActual para a área de apenas usar o botão “Imprimir” em sua chave.

Enhanced área da propriedade

A área da propriedade foram aprimorados graficamente. As seções são agora mais bem estruturada.

Versão 2.6.3

(15.12.2009)

PDF24 Creator suporta interface Twain agora

PDF24 Creatorpode importar imagens a partir de dispositivos como scanner, webcam ou digicam para criar ficheiros PDF com base nessas imagens importadas. A exigência é que estes dispositivos suporta interface twain também. Se um dispositivo suporta interface twain você pode seleccionar o dispositivo através de caixa de selecção do dispositivo. Dessa forma, você pode criar mapas de imagem PDF e você pode usar para otimizar PDF24 Creator PDF para certos fins, por exemplo, você pode comprimir PDF para enviá-lo via e-mail.

Versão 2.6.2

(07.12.2009)

PDF24 Creator now usable with Windows Terminal Server

Version 2.6.2 of PDF24 PDF Creator is now installable and usable within windows terminal server. This version has been tested within a Citrix terminal server environment.

Versão 2.6.1

Corrigido o problema durante a instalação da impressora em PDF 7 / Windows Vista x64

Quando a impressora PDF foi instalado em sistemas com versões de 64 bits do Windows Vista e 7, em seguida, o utilizador tem uma mensagem de erro que a impressora pdf não pôde ser instalado. Esse problema é corrigido. O instalador terminou sem erros em versões de 32 bits do Windows. O PDF24 Creatoragora pode ser instalado em 32-bit e 64-bit sistemas com o Windows XP, Vista, 7, sistema operacional.

Instalador melhorado, para instalar uma versão antiga quando estiver disponível

Se o PDF24 Creatorfoi instalado sem remover uma versão antiga que poderia vir a conflitos. Agora o instalador verifica se uma nova versão antiga está instalado e desinstala a versão antiga antes de instalar o novo.

Uninstaller melhorou

Para desinstalar PDF24 Creatorde todos os componentes em execução têm de ser fechadas. Se um componente é executado, o processo de desinstalação uninstaller blocos. O problema era que PDF24 Creator utiliza um componente de execução escondido para criar ficheiros PDF e este componente teve que ser fechado pelo utilizador. Para facilitar que o instalador e desinstalador fecha primeiro este componente oculto automaticamente e o utilizador só tem de fechar todos os componentes visíveis execução pertencentes a PDF24 Criador.

Versão 2.6

(25.11.2009)

ambientes de utilizador Multi agora suportados

O PDF24 Creatorfoi optimizado para ambientes multi-utilizador. Houve problemas em versões mais antigas quando se utiliza impressora PDF no seu PC, com mais de um utilizador. Este problema foi corrigido. Agora você pode usar a impressora pdf no PC, com mais de um utilizador.

O comportamento da actualização foi alterado também. Nem todo utilizador pode instalar as actualizações. O PDF Creator atribui verificações de segurança de utilizadores e determina se um utilizador tem os direitos necessários para actualizar o programa. Um utilizador com direitos limitados não pode instalar actualizações mas os administradores podem. Os novos conceitos do Windows Vista e Windows 7, foi tidos em conta. Os utilizadores com direitos limitados só verão uma notificação de que está disponível uma actualização.

Função integrada de captura de ecrã PDF.

Agora você pode capturar o ecrã ou apenas uma parte do ecrã para criar um PDF com esse conteúdo. Existem várias opções: ecrã inteiro, ecrã da área de trabalho, janelas activas, conteúdo da janela activa ou uma área definida pelo utilizador. O recurso de captura de ecrã está localizado no ícone de bandeja Windows no PDF24 Creator.

Ícone de bandeja Windows integrado.

Agora existe um ícone da bandeja windows para o PDF24 Creator. Actualmente, o ícone da bandeja é usado para exibir configurações, abrir o editor PDF, mostrar informação, fechar programas de backend e usar o recurso de captura de ecrã. O ícone é exibido se estiver em curso um processo de criação de PDF. Podem também ser exibidas notificações do programa.

Novas drivers de impressora PDF para Windows Vista e Windows 7.

O PDF24 Creator usa novas drivers de impressora PDF. As novas drivers também oferecem mais funcionalidades que as mais antigas. Agora não existe nenhum limite para o tamanho do papel. Pequenas páginas podem ser criadas tão bom quanto os grandes. A driver contém pré-definidos, os formatos de papel mais usados papel ISO A0 - A7, carta, livro, o executivo. Um tamanho de papel definido pelo utilizador é também possível.

Área de configurações extendida.

Agora há uma área de preferências central. Esta área pode ser aberta a partir de vários locais. O utilizador pode configurar mais definições do que nas versões mais antigas. A área de preferências pode também ser usada em PCs com mais de um utilizador. Nem todos os utilizadores podem alterar todas as configurações, por exemplo, somente os administradores podem alterar o comportamento de Actualização. O UAC do Windows Vista e 7, foi tida em conta. Um utilizador verá uma mensagem quando uma página de propriedades não podem ser seleccionados por causa de direitos limitados. Existe também a possibilidade de elevar um utilizador se o utilizador é um administrador para fazer todas as alterações.

Programa de reestruturação

O PDF Creator foi reestruturado a fim de preparar o programa para futuros desenvolvimentos.

PDF Viewer em PDF Editor reforçada

Em algumas situações o visualizador PDF bloqueava. O problema foi corrigido. Além disso, você pode agora navegar pelas páginas com as teclas de setas.

Melhorado o explorador de ficheiro no editor PDF.

O explorador suporta agora atalhos/links. O explorador pode ser ocultado para que apenas seja mostrada a lista acima de documentos. Há entradas de menu apropriadas para ocultar ou mostrar o explorador.

Definições do programa estritamente separadas das definições do utilizador.

As configurações do programa e as configurações de um utilizador estão agora rigorosamente separadas. Cada utilizador pode mudar o seu PDF Creator para que ele se adapte às suas necessidades. A mudança será guardada nos perfis de utilizador. Somente os administradores podem alterar as configurações que dizem respeito a todo o programa.

Ferramenta conversora de documento para PDF suporta agora atalhos/links.

O componente que é responsável pela conversão de documentos em PDF suporta agora atalhos/links no sistema de ficheiros . Além disso, foi corrigido um bug na ferramenta.

Actualizador extendido.

O Actualizador do PDF24 Creator foi redesenhado e ampliado. A orientação do utilizador também foi alterada. O actualizador suporta agora ambientes com múltiplos utilizadores. Os utilizadores com direitos limitados podem correr o actualizador para procurar por actualizações, mas não é podem desinstalá-las. Isto está reservada para os administradores.

Corrigido bug na assinatura PDF no Windows Vista e Windows 7.

Houve um erro no processo de assinatura ao assinar um ficheiro PDF no Windows Vista e Windows 7. Parcialmente a assinatura estava errada. O bug foi corrigido e as assinaturas PDF estão agora correctas. As assinaturas podem ser verificadas no Adobe Reader.

Corrigido bug do tempo da assinatura.

O tempo de um processo de assinatura não era guardado correctamente. O problema foi o tempo de deslocamento do fuso horário. O bug foi corrigido.

Instalador melhorado.

O instalador do PDF24 Creator foi melhorado. O instalador agora procura os componentes activos. Se um componente estiver activo o instalador notifica o utilizador que todos os componentes têm de ser fechados. O instalador só instala uma actualização/nova versão, se todos os componentes estiverem fechados. Isso funciona também num ambiente com múltiplos utilizadores. Enquanto um utilizador tiver componentes a correr, o instalador bloqueia as instalações.

editor de PDF pode ser iniciado com um ficheiro

O PDF24 Editor pode ser iniciado com um ficheiro como por exemplo, arrastar & soltar um ficheiro para o ícone do editor PDF24. Isto não era permitido nas versões mais antigas. O ficheiro será carregado automaticamente no editor e é convertido, se o ficheiro não for um PDF.

Versão 2.5.1

(25.09.2009)

Integrado melhor conjunto de ícones para o Windows Vista e 7.

O novo conjunto de ícones contém agora ícones muito maiores, de modo que os símbolos do programa parecem muito melhor quando se utiliza uma pré-visualização grande no Windows Explorer.

Selecção de idioma optimizado no programa de arranque.

A selecção do idioma no início do primeiro programa foi optimizada. Existia um problema na versão 2.5 na qual a língua alemã se encontrava sempre seleccionada, o que não é bom para quem não fala alemão. O problema está agora resolvido. A língua alemã está seleccionada nos sistemas de língua Alemã e o Inglês é usado para todos os outros. Esta versão é fornecida com um ficheiro de língua Alemã e um de língua Inglesa.

Versão 2.5

22.09.2009

Perfis integrados.

Com os perfis, você pode controlar a qualidade e a compressão de um PDF. A baixa qualidade dos resultados em ficheiros PDF de tamanho menor e resultados de alta qualidade em tamanhos maiores. Um perfil pode ser alterado no PDF Assistant após criar um PDF através da impressora pdf24 ou no menu de contexto de um documento do PDF24 Editor . As definições do programa contêm uma opção para definir um perfil padrão, que está seleccionado por defeito.

Enviar ficheiro PDF por email.

Os ficheiros PDF podem ser enviados por e-mail. Isto pode ser feito no assistente de criação PDF após ter sido criado um PDF na impressor PDF24 ou no interface de edição do utilizador. Foi adicionado um botão no assistente de criação PDF, várias entradas de menu e um botão na barra de ferramentas no editor para enviar um PDF.

Assinar um ficheiro PDF.

O PDF24 Creator agora pode assinar os documentos PDF. O software contém tudo para criar e inserir uma assinatura num documento PDF. A assinatura pode ser feita com certificados auto-assinados, que podem ser criados como PDF24 Creator ou com um cartão de assinatura. Ao usar um cartão de assinatura de um middleware especial Windows é necessário fazer certificados no cartão disponível e utilizável. A assinatura é apenas integrada no editor. O editor contém um novo botão na barra de ferramentas e uma nova entrada de menu de contexto para abrir uma caixa de diálogo de assinatura. Aí, você tem que escolher um certificado e inserir a informação necessária para a assinatura.

Determinação de um nome de ficheiro para um PDF criado.

Esta versão determina nomes de ficheiros para ficheiros PDF criados com a ajuda do interface de impressora do Windows. Se você imprimir um documento com o nome de XYZ na impressora PDF24, um ficheiro PDF será criado e o nome XYZ será determinado como nome para o PDF. Isto ajuda quando se trabalha com PDF24 Creator especialmente quando criar muitos ficheiros PDF. Isto pode ser usado por outro software para nomear documentos PDF quando criados com impressora PDF24.

Conversão de imagem para PDF optimizada.

As imagens podem agora ser convertidas para PDF um pouco melhor. O PDF criado não contêm mais uma margem mas apenas a imagem. Isto pode ser usado para criar mapas de imagem agradáveis ao converter imagens para PDF e fundi-las num só ficheiro PDF. O ficheiro resultante pode conter imagens de tamanhos diferentes.

Usabilidade melhorada.

A usabilidade foi melhorada de várias maneiras para que o utilizador tenha que clicar menos vezes ao trabalhar com o editor. Isto inclui as funções de fundir e eliminar com os botões da barra de ferramentas. Com base na selecção de documento pode ser decidido o que deve ser fundidas ou excluído. Isto poupa um clique na escolha entre todos ou apenas os documentos seleccionados.

Removido bug relativo às definições de segurança.

Se você tinha aberto a caixa de diálogo das definições de segurança, feito alterações, fechado e então reabrir, as alterações não eram exibidas apesar de guardadas correctamente. Este problema foi resolvido.

Resolvido bug de marcação de páginas únicas.

Selecção de uma única página não seleciona todos os documentos PDF mais carregado. Este é um bug em versões anteriores. Se o utilizador seleciona uma única página em um documento, em seguida, o documento que contém a página fica seleccionada. Todos os outros documentos torna-se desmarcada.

Logo inicial ao abrir o editor PDF24 removido.

O editor PDF24 arranca muito rápido. Um logo inicial não faz sentido aqui. Portanto foi removido. O logo inicial exibia a imagem de personalização. Como substituto para o logo iniciar, temos um link inserido na área de rodapé do editor. Um clique neste link abre uma janela com o conteúdo que foi mostrado anteriormente no ecrã. A imagem de personalização nessa janela é clicável. Um clique sobre a imagem abre um navegador com o URL que foi inserido no processo de personalização.

Um par de entradas do menu modificadas.

As entradas de menu para as opções que estão seleccionados eram exibidas em cinza e não podiam ser seleccionadas novamente. Habitualmente entradas de menu cinzentas significam que não podem ser alteradas. Nós mudamos isso para exibir uma caixa marcada em frente à entrada de menu para mostrar ao utilizador que a opção está de momento seleccionada. Isto é melhor e mais fácil de entender.

Área de definições melhorada e adicionadas mais opções.

A área de configurações é exibida agora num novo interface de utilizador e acrescentámos mais opções para personalizar o PDF24 Creator. Agora você pode alterar o comportamento de actualização, idioma e perfil de qualidade standard.

Driver de impressora PDF para o Windows 7

O instalador instala um driver de impressora adequado ao instalar no Windows 7. O PDF24 Creator pode ser utilizado agora com Windows 7.

Componentes Signed PDF24 Creator.

Todos os componentes do PDF24 Creator são assinados com um certificado de modo que você tenha a certeza de que o PDF24 Creator é seguro e não tenha sido alterado por terceiros. Windows Vista e Windows 7 irão mostrar-lhe uma mensagem dizendo se o programa é seguro ou não, quando você inicia o PDF24 Creator.

Update behavior changed

The update behavior have been changed slightly. You can customize the behavior in settings. You can choose between three options (automatic, only check and notify, disabled). The updater and other program parts have been adapted to the new options.

PDF Creation Assistant reestruturado.

O layout do assistente foi melhorado. A caixa de selecção para seleccionar um perfil de qualidade e um botão para enviar o PDF criado por e-mail foram adicionados. Foram removidas a actualização e botão de informações e foram inseridos como um link na barra inferior. Agora, todos os botões representam puros botões de função que fazem algo com o PDF criado.

Menu das ferramentas de editor extendido.

Existem duas novas ferramentas no editor PDF24. A primeira ferramenta nova pode criar um certificado auto-assinado e a segunda ferramenta abre um gestor onde pode gerir os seus certificados. Estas ferramentas são importantes para a funcionalidade de assinatura.

Versão 2.0.1

31.01.2008

Resolvido problema de bloqueio no visualizador integrado.

Podia acontecer um bloqueio no visualizador integrado quando um documento contém páginas de outros documentos e quando este documento é apresentado no visualizador. Navegar entre as páginas podia causar o bloqueio. Este bug foi removido.

Versão 2.0

Introduzido editor de PDF.

Esta versão contém um editor de PDF que tem as seguintes funcionalidades:
  • Fundir PDF
  • Separar PDF
  • Extrair páginas
  • Reordenar páginas
  • Imprimir um ficheiro PDF.
  • Explorador integrado
  • Visualizador integrado
  • PDF área editor de PDF carregado
  • Pré-visualizar PDF
  • Alterar as propriedades e configurações de segurança PDF
  • Automático de documentos para conversão de PDF
  • e muito mais

Actualizador melhorado.

O actualizador foi extraído e inserido em ficheiro próprio executável e a funcionalidade foi extendida.

Optimizado programa de fundo PDFBackend.

O programa de fundo PDFBackend foi melhorado. Este programa espera no fundo por um novo trabalho de impressão que possa ser impresso numa impressora PDF24 .

Instalação da driver da impressora foi melhorada.

A instalação da driver da impressora PDF foi melhorada. O novo instalador agora pode instalar drivers de impressora diferentes, que podem ser usadas com PDF24.

Adicionada aplicação que converte documentos para PDF.

Foi adicionado um programa que converte documentos como Word ou PowerPoint para PDF. Nesta versão, a conversão é feita com a ajuda da impressora PDF do PDF24. O programa deve ser iniciado com um documento, como argumento que imprime de seguida o documentos na impressora de PDF.

Adicionado botão editar PDF no assistente de criação de PDF.

O assistente tem agora um botão para editar um PDF criado. Um clique sobre este botão inicia o editor e carrega o ficheiro PDF criado.

Carregar automaticamente documentos no editor.

Se o editor PDF é aberto e se um PDF é criado com impressora PDF24, então o PDF criado é carregado automaticamente no editor e não no assistente.

Publicidade
NEW: PDF24 Creator 8.1.0
» Info » Características » Changelog
Descarregar PDF Creator
100% Grátis | 100% Livre de spyware
Publicidade
Word para PDF / Crie PDF facilmente!
Caixa de documento para PDF
Converta um documento para PDF em apenas três passos
1
2
Mostre como você é porreiro!
Faça o design do seu PDF Creator
Carregue uma foto e crie o seu PDF Creator personalizado!
A caixa de ferramentas PLUGIN PDF
Plugins 100% gratuitos | 100% livre de spyware | 100% Ovelha!
Plugins do PDF Wordpress PDF Plugin Webmaster PDF Plugin phpBB PDF Plugin Blogger PDF Plugin